Help with Fat Lip offset
#1
#4
The following users liked this post:
hawaiian5 (08-06-2017)
#5
#7
Trending Topics
#8
Thanks,
Answer to your question.....Yes, as long as the width and the offsets are the same.
They offer those (ACF'S) in a 19x9/19x11 and for your custom offset it all depends on how aggressive you want to go.
The rear at 11/+15 is a very small amount of poke past the fender (which I like) The front is almost flush so you could run a lower offset for a fatter lip.
I have seen crazy aggressive numbers like front: 9.5/19" 7" lips rear: 11.5/19" 7.5" lips -25 all around with a crap ton on neg camber though so its all depending on your taste.
I suggest you look at the offset and fitment thread for some other ideas before you spend the 3-4k your going to spend on these wheels. Also, If you start dipping into these wide and low offset wheels you would be better off at the min rolling the fenders in the rear.
https://g35driver.com/forums/wheels-...pecs-only.html
Answer to your question.....Yes, as long as the width and the offsets are the same.
They offer those (ACF'S) in a 19x9/19x11 and for your custom offset it all depends on how aggressive you want to go.
The rear at 11/+15 is a very small amount of poke past the fender (which I like) The front is almost flush so you could run a lower offset for a fatter lip.
I have seen crazy aggressive numbers like front: 9.5/19" 7" lips rear: 11.5/19" 7.5" lips -25 all around with a crap ton on neg camber though so its all depending on your taste.
I suggest you look at the offset and fitment thread for some other ideas before you spend the 3-4k your going to spend on these wheels. Also, If you start dipping into these wide and low offset wheels you would be better off at the min rolling the fenders in the rear.
https://g35driver.com/forums/wheels-...pecs-only.html
Last edited by G35freaks; 08-07-2017 at 09:58 AM.