G35 Turned off while driving
#1
G35 Turned off while driving
Hi,
My car turned off by itself while driving, then when I turned it back on the VDC, Slip and check engine light is on. After a quick search, the most popular solution is Crankshaft Position Sensor Bank 1. Looks like an easy fix, though the part is $100. I've seen other people reply that it did not work, and there was never really a solid solution, do I have to replace both Bank 1 and Bank 2? or is it something completely different? Thanks.
My car turned off by itself while driving, then when I turned it back on the VDC, Slip and check engine light is on. After a quick search, the most popular solution is Crankshaft Position Sensor Bank 1. Looks like an easy fix, though the part is $100. I've seen other people reply that it did not work, and there was never really a solid solution, do I have to replace both Bank 1 and Bank 2? or is it something completely different? Thanks.
#2
#3
#4
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
Op I think you're confused. If you have the DE motor it runs with 1 crank sensor and 2 camshaft position sensors. If you have the rev-up motor then you have 4 cam sensors. If you don't know the difference between the 2 you need to read a lot more on here before you try to work on your car. Also as mentioned the first thing you should always do when a SES light appears is have the car scanned for trouble codes (DTC's) They will help a ton with diagnosing issues so you'll know where to look for the solution.
The following users liked this post:
AntonyH (02-01-2019)
#6
So I got the code p0340 which is bank 1 camshaft position sensor, and I got p0615 which is the circuit relay starter. causing the car not to turn on. This relay circuit sensor only happened right when my sensor went out while driving, does this mean once I replace the sensor the circuit relay starter will fix?
#7
Op I think you're confused. If you have the DE motor it runs with 1 crank sensor and 2 camshaft position sensors. If you have the rev-up motor then you have 4 cam sensors. If you don't know the difference between the 2 you need to read a lot more on here before you try to work on your car. Also as mentioned the first thing you should always do when a SES light appears is have the car scanned for trouble codes (DTC's) They will help a ton with diagnosing issues so you'll know where to look for the solution.
Trending Topics
#9
Join Date: May 2017
Location: Washington State
Posts: 14,791
Received 2,456 Likes
on
2,150 Posts
Coupe 6MT Premium RAS
The following users liked this post:
NemesisGee (02-03-2019)
#10
Thread
Thread Starter
Forum
Replies
Last Post
tibasnatch
G35 Coupe V35 2003 - 07
19
05-15-2012 12:04 PM
willcho415
Interior & Exterior
0
06-28-2009 08:17 AM
r0csfinest
Engine, Drivetrain & Forced-Induction
39
04-18-2007 05:02 PM
cbcatua
G35 Sedan V35 2003-06
3
10-21-2005 11:18 PM