just a slight issue with the drivers window ?
when you open and close the drivers door the widow will not always drop and rise ? it works fine when the engine is running . the window will work fine off the rubber switch by the door.
the widows work fine apart from this.

Pretty good chance the window regulator is starting to show some wear. Mine started doing this about a year ago, if I apply a little pressure to the top of the glass it will drop but gravity isn't letting it fall on it's own anymore. I opened the door access panel and sprayed white lithium grease on the 4 corner rollers/tracks and ran the window up/down a half dozen times and it's worked fine ever since.

thanks that sounds helpful .

I had the same issue, and my door window was just torqued a little bit too tight to the window track. Loosening and retightening fixed it.