ECU reset
Originally Posted by slikster818
i know the pedel method resets the ECU but does it also reset the vehicle diagnostic codes.
Originally Posted by b00stindc2
What pedal method do you speak of? I've never heard of this.
Joined: Jun 2002
Posts: 30,341
Likes: 9
From: Cambridge, Ont. Canada
Originally Posted by b00stindc2
What pedal method do you speak of? I've never heard of this.
ECU RESETS
C.
I"m not entirely convinced on the pedal method - for example, after it the tranny still feels the same. But pull the battery overnight and bang, tranny feels like it's brand new, no lag or anything.
Trending Topics
Originally Posted by MikeStarrG35
I got it to work, cant feel any difference though.
Turn key
wait 3
pump 5
wait 7
press and hold 10 (light blink slow)
release
press and hold 10 again (light blink fast)
Turn off ignition and restart
Last edited by MBentley; Jan 25, 2006 at 12:50 PM.
1) Turn ignition on, wait 3 seconds
2) Push fully and release the gas pedal 5 times within 5 seconds
3) Wait 7 secs, fully push gas pedal and hold for 10 seconds until the CES light starts to blink
4) Release gas pedal (you are in diagnostic test mode 2)
5) Press and hold gas pedal for more than 10 seconds. Release pedal.
6) The CES light will continue to blink
7) Turn ignition off. Restart car.
seems the steps are ok to me. they're identical. no?
2) Push fully and release the gas pedal 5 times within 5 seconds
3) Wait 7 secs, fully push gas pedal and hold for 10 seconds until the CES light starts to blink
4) Release gas pedal (you are in diagnostic test mode 2)
5) Press and hold gas pedal for more than 10 seconds. Release pedal.
6) The CES light will continue to blink
7) Turn ignition off. Restart car.
seems the steps are ok to me. they're identical. no?



