sori guys ive tried searching but still couldnt find an answer lMFAO

so what is MREV? wut does it do? any hp gain? how much would it cost?


THANKS and i reli dont noe much about cars still learning >,<

 

http://www.motordyneengineering.com/G35.asp

Motordyne engineering has made improvements to the intake of the VQ35 that help the flow and keep the intake air at a lower temp to help improve power and torque. It involves several components. 1. and "isolating" gasket for the intake lower plenum that keeps engine heat away. 2. a copper gasket for the "mass airflow sensor" that keeps it from freezing in cold weather and allows you to cut off the water jacket coolant in the summer to keep "heat soak" to a minimum. Lastly, if you have a 2005-06 "rev-up" style motor, you can get the lower air plenum from the 2004 models that give significant HP/TQ improvements.

All is explained in other posts here:

https://g35driver.com/forums/showthr...V%2C+motordyne

https://g35driver.com/forums/showthr...V%2C+motordyne

This guy was a test mule for Motordyne:

https://g35driver.com/forums/showthr...V%2C+motordyne

Hope I didn't over load you!

 

Tex
Your a good man! A little help goes a long way, Today!

 

o yea 1 more question for the G35 how the intelligent key work if u dun need to pull it out of ur pocket or etc is there a push start engine button or soemthing like tat?

 

Yes you are correct. All you need to do is have it in your pocket.

BTW, don't take this the wrong way, but do you always write like that? Or is your spell check just broke?

 

We were ALL noobs at one time. I like helping the new guys.

 

+1 for you Tex. We need more people like you on this forum.

 

if you are looking to modify your plenum, might i recommend the APS Tallboy in lieu of the MREV.

 

Any Dyno to prove that this help RevUp motor? I might be out of sync with todays technology, but as far as I know MREV is the only thing that really make any noticeable power improvement on a RevUP Motor(not including headers, exhaust and FI)

 

Well I'll just assume that you don't have a REVUP motor then... coz you're asking about intelligent key.

 

All I have to say is... MREV is a must have.

 

What if i have the crawford intake plenum..... can those lower intake fit?

thanks for help...