I am about to put a coupe exhaust on my sedan?
I believe there is a safety issue with where the fuel runs... I could be wrong but I'm pretty sure that's why Stillen didn't do dual (one on each side)
I'm no expert but I do remember reading that or talking with someone about that... I believe DaveO was abreast of the Stillen R&D when gen 1 was designed... I think I may have talked with him about this?
Maybe you should just wait for the '07. It has what you are looking for.
I'm no expert but I do remember reading that or talking with someone about that... I believe DaveO was abreast of the Stillen R&D when gen 1 was designed... I think I may have talked with him about this?
Maybe you should just wait for the '07. It has what you are looking for.
Here u go.
Thnx to George (AlcatrazT2)
<embed src=http://sharkle.com/externalPlayer/84252/na1a42yr4/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
<embed src=http://sharkle.com/externalPlayer/84254/1n11r323a/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
<embed src=http://sharkle.com/externalPlayer/84258/3idn2y1yd/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
<embed src=http://sharkle.com/externalPlayer/84261/3d3i2a33n/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
Thnx to George (AlcatrazT2)
<embed src=http://sharkle.com/externalPlayer/84252/na1a42yr4/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
<embed src=http://sharkle.com/externalPlayer/84254/1n11r323a/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
<embed src=http://sharkle.com/externalPlayer/84258/3idn2y1yd/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
<embed src=http://sharkle.com/externalPlayer/84261/3d3i2a33n/3/ wmode=transparent width=340 height=310 type=application/x-shockwave-flash></embed>
My custom sedan dual exhaust
I had this done at a local shop where I live. Going back to tweak the sound a bit. Drones a bit at lower speeds and may reposition tips a bit. I've scraped them a couple of times and am thinking about lowering the car so they need to go up and in a little bit. Also thinking about going back to a Y-pipe configuration. Here are some pics. I'll work on some soundclips.






Feedback?






Feedback?
u can start with X-pipe instead of the Y-pie right after the cats and then continue what u have now and get true dual muffler from one side only. I think that is the best noise/power u can get.
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach

TunerDad- that' awesome that you actually were able to do it. Sound clips would be nice to get an idea of what it sounds like. The tips sit a little too low for my taste and looks out of place on the sedan, but other then that it looks good.
-GP-
-GP-
Joined: Jun 2005
Posts: 212
Likes: 0
From: Coventry, RI
Well I had one of my techs here at Inskip Infiniti look it over and it would definitely work, I just don't want to cut my car apart. I agree with most of you guys out there. I am going to go the custom route and get true dual exhaust made for my car. TUNERDAD nice job we need some sound clips bad, I can't wait to hear it. Thanks for everyone's feedback it helps allot.




