Hi,

I'm just about to get 20" Maya STM's for my 4dr and also Eibach pro springs at the same time and had a few questions.

8.5F 9.5R 245F 275R

1) Does anyone have any other ideas for 20" spoke design like the STMs? I like the Volk winnings, but they don't have 20" size.

2) What offsets do you think are best for this setup? I don't know much about offsets so any help would be appreciated.

3) 30 or 35 sidewall for front and rear? Would 35 fit and offer better protection?


Thanks so much!

-Curtis

 

(1) How about the Privat Netz? NETZ
(2) A +40 or +38 offset should be good

 

or axis penta which comes with a gigantic lip in 20"

 

RPM 505
ADR STERLING(PRETTY SURE)
HP EVO
I JUST ORDERRED THESE
http://cgi.ebay.com/ebaymotors/20-Se...76297854QQrdZ1
(BLACK ONES)

 

On the 8.5 front you will want around a +38 offset, and the 9.5 rear will need around a +42 to +45 offset

 

how much you looking to spend?

 

I'm thinking between $3800-$4300. I did look at the Axis Pentas and they only have 20" in 9 and 10. The HP's didn't have 20s.

-Curtis

 

A 9.5" +40 will fit. I have 10" +43.

 

did you look into Work VS-XX? or also BBS RS series? I like the mesh style rims too, but there are not a whole lot out there in 20's at a reasonable prices. You could also look into Iforged as they have a group buy going now at great prices, it's a great deal.

 

I looked at the vs-xx but didn't like the silver finish. The chrome one looked kind of dull as well. I hear they are very high quality though. My top choice right now is Maya STM, but I actually like the curves of the spokes of the pentas or vs-xx better.

Anyone have a good shot of the vs-xx is shiny highpolish?

-curtis