I took my seat out to fix adj. controls. Dissconected air bag for driver's seat, now my airbag light want stop flashing. Everything is now connected, but still flashing. I've already searched and could not find how to fix this. Help me please, I dislike the dealer.


Thanks, K-S-W

 

Try reseting the computer?

 

try restting the computer. I would suggest removing the battery and pump brake lights a couple of times. The pedal method might work too but i would do the full drain no power style since it is your air bag.

 

ohh yeah checked the service manual and you should check the fuse for the airbag module

 

You need to reset the airbag module. I had the same problem when I put in my coupe seats.

Get in the car and turn the ignition (don't start) on for ~8 seconds the car will do a check and the airbag light will come on solid. As soon as it goes off (but before it flashes) turn it back off. Repeat this 3-5 times and it will reset your airbag system.

 

Thanks a bunch fellas. You guys are a great help. TTrank it worked horray.

Later, k

 

G team to the rescue!

 

Glad to help!

It took me a while to figure it out on mine.

 

I had just ran into the same problem, thanks a lot man, really helped me out!

 

The airbag light started doing this yesterday after I moved my seat forward.... I am going to try this before taking it to the stealership...

 

If you didn't disconnect anything and the light came on you should check under your seat to make sure it didn't get caught and come unplugged. Then do the reset.

 

Don't forget our DIY/FAQ forum, everyone......the AirBag reset is there too.

AIRBAG LIGHT RESET.

C.

 

That was where I found it when I put my coupe seats in.

 

Just recently my passenger airbag light would turn on then off. I've never messed around with my seats such as taking them out, would it work if i just resetted it?

 

It might. The same module controls them. The reset is not just for the seats.