Diconnected driverside air bag - Page 2 - G35Driver - Infiniti G35 & G37 Forum Discussion

Sep 14, 2006 | 10:50 PM

#16

dvsmeth0dz

Registered User

iTrader: (6)

Joined: Jan 2006

Posts: 2,550

Likes: 10

From: HI, now NV

i see. i'm gonna try and do that but where is the reset?

Sep 16, 2006 | 01:20 PM

#17

andycon

Guest

Posts: n/a

I have 03 sedan - the airbag warning light started coming on a few days ago - I had done nothing to cause it to come on - took it to the dealer, and they plugged in to consult and checked the error codes - was a bad module: this was the error according to the work order:

Consult test: found DTC B1134 left hand side module left frt seat air bag has open circuit replaced left side
Parts: Module assay-side air-K8EHA-AM600

Was replaced under warranty.

Sep 16, 2006 | 01:27 PM

#18

balla

Registered User

iTrader: (8)

Joined: Aug 2005

Posts: 786

Likes: 0

From: So. Cal

i have the same problem but i have sparco seats in my G and the red light is flashing and the passenger light by the clock is on too. is there any way to have the passenger dash airbag come out but i understand the sides wont? let me know if that reset will work in my situation. thanks!

Sep 18, 2008 | 01:54 PM

#19

dul311

Registered User

Joined: May 2006

Posts: 24

Likes: 0

Quote:

Originally Posted by andycon

I just took my 03 sedan to the stealership for the same problem. I am getting a flashing airbag light. I reset it a couple of times and it came back. The only difference for me is that my warranty has now expired. The dealership scanned for codes and they also got the b1134 code. They quoted me $770 just for the module. That is crazy!!

I am going to take the drivers seat out this weekend to inspect it. Sometimes the connectors come lose. I was also looking on ebay, a replacement drivers & passangers seat is $300! From what I understand, the potentially faulty module is located in the drivers chair. So why not replace the seat? I have been looking for an excuse to upgrade to heated seats:-)

Oct 26, 2009 | 05:02 PM

#20

Damionlj1

Registered User

Joined: Apr 2008

Posts: 29

Likes: 0

Quote:

Originally Posted by ttrank

You need to reset the airbag module. I had the same problem when I put in my coupe seats.

Get in the car and turn the ignition (don't start) on for ~8 seconds the car will do a check and the airbag light will come on solid. As soon as it goes off (but before it flashes) turn it back off. Repeat this 3-5 times and it will reset your airbag system.

Just to let everyone know. This works for the 08 sedans as well..I use really heavy duty large floors mats in my car. Occassionally I will move the seat forward when carrying my son in the back seat of the car, But when it is just the wife and I , I will move it back. The clip underneath the seat got caught and unclipped. The dealer reset the code for free twice ,but advised me that the 3 time due to me using non factory floor mats they would charge me.

Just performed reset and It worked perfectly...Thanks alot guys...Saved me $90 bucks.