I know that the AT's have the stilen SC options but is there anything out there for the 05 6MT? SC or Turbo

thnx

 

the new vortech kit for the "revups" should fit.

I know the turbonetics kit works with a couple very minor tweaks. (that's what I have.)

 

thanks will look into them.

 

if you go UTEC, almost all the kits will work on the revup sedan.

 

It will be turbo for my 04 6MT. Looking at the APS single or maybe even do my own custom kit using the stock manifolds. Of course there will be some slight changes that will have to be done. Intercooler piping will probably have to be tweaked and the fuel system. Not crazy about the stock front bumper and the lack of air flow over the intercooler. Did my own turbo set up on my 96 I30 5spd so this couldn't be any harder.

 

The only changes I had to make on the TN kit was to dimple (hammer time) the pipe that comes across the front engine cover. It was hitting (but that is a "revup" issue, not a sedan issue.)

The power steering cooler was a little different, but nothing major.

Fuel was easy. Our regulars on the sedan require very little modding to the pump housing.

 

Noah you going FI? go for it!!!!

 

I've got a stage 4 Stillen on my 04' 6MT.

Stillen does have up to Stage 3 for the 05-06 6MT.