Bi Xenon Projection
This guy here has a point that should be noted. The TL projectors are huge and a PITA to fit into other housings. If you look at my retrofit in the crossfire forums link i posted earlier. You will see how much of the TL projector had to be cut to make it fit in the housing. Dual TL projectors would be an overkill and only assist in adding 3" to your E-Peen. I would go with a TL projector with ZKW lense with 55w ballast and run regular philips d2s 4300k bulbs. Keep in mind 55w will burn out 35w bulbs alot quicker, so no point wasting $$$ in bulbs when you burn them up. Kinda like buying hella expensive tires when you are running MAD negative Camber. If you want quad projectors then get find a different projector that is smaller and easier to work with.
Last edited by faiz23; May 4, 2011 at 05:47 PM.
I'm thinking dual tl projectors from retrofit with the 35 watt bulb in the headlight one so I can just run those in in stop and go traffic on I95 and a 55w bulb in the fog/high slot so I can fire it up when there is less traffic. This would probably be pricey, but if I'm going through all the effort for more light I might as well do it right! (so long as the tl fits up top)
Does anyone have the 55s...if so do you get flashed a lot?
Thanks again for your input.
Does anyone have the 55s...if so do you get flashed a lot?
Thanks again for your input.
I have yet to get flashed except when I accidentally leave my highs on.
They're not annoying at all with the low-beams. That's the beauty of projectors
Thread
Thread Starter
Forum
Replies
Last Post
