$200 for the first mod, what should it be?
Joined: Aug 2005
Posts: 342
Likes: 0
From: Missouri City, TX
$200 for the first mod, what should it be?
Well, started with a modest mod budget of $200 for this month b/c of saving for xmas gifts, etc. What would you mod with a stock sedan and $200?
check the marketcenter i think someone is sellin their ztube.....and if you want go get a K&N filter itll be the cheapest thign to get cheaper than the jwt pop charger... ztube and K&N filter should be less than 150 for sure...
but if you save a lil more try to find a use injen intake...you wont regret gettin an injen..
but if you save a lil more try to find a use injen intake...you wont regret gettin an injen..
Originally Posted by ttrank
Plenum spacer.
Originally Posted by ttrank
There is a Stillen intake on ebay right now for ~$75 which is a steal!
but i would get the spacer first
Trending Topics
Joined: Aug 2005
Posts: 342
Likes: 0
From: Missouri City, TX
She's an '06 so is the coupe mid-pipe no longer a viable mod? I'll do the search research on it so no detailed answers are neccesary.
On the plenum spacers, I haven't had much luck finding them under $200. The JWT popcharger and z-tube from everythingg35.com is looking pretty good right now...
On the plenum spacers, I haven't had much luck finding them under $200. The JWT popcharger and z-tube from everythingg35.com is looking pretty good right now...
Registered User
Joined: Oct 2006
Posts: 37
Likes: 0
1 - Clear corners
http://www.trademotion.com/partlocat...catalogid=4876
2 - Window tint
Should be able to do both for somewhere around $200
http://www.trademotion.com/partlocat...catalogid=4876
2 - Window tint
Should be able to do both for somewhere around $200
this what i found out about the z-tube pop charger combo...
"Hard Plastic Factory Intake tube off the 350Z (New Part) This Z-Tube is what makes the difference between the 287HP 350Z Motor and 280HP G35 Motor
The Z-Tube alone adds a true 6.5RWHP. When combined with the Pop-Charger you gain more then 9RWHP!
Why is this set up better then a "Cold Air Intake"
This intake system uses a combination of Factory Parts and Jim Wolf Technology Parts. The Z-Intake Tube is Plastic and does not heat soak like metal intake tubes. Less heat means more Horse Power! The Pop Charger Heat Shield has a cut out to use the front air intake scoop as well as draw in air from the front of the bumper.
This intake gives you a Roaring sound from your engine bay as well as a "PSSSSSSSSP" sound when hitting the throttle."
"Hard Plastic Factory Intake tube off the 350Z (New Part) This Z-Tube is what makes the difference between the 287HP 350Z Motor and 280HP G35 Motor
The Z-Tube alone adds a true 6.5RWHP. When combined with the Pop-Charger you gain more then 9RWHP!
Why is this set up better then a "Cold Air Intake"
This intake system uses a combination of Factory Parts and Jim Wolf Technology Parts. The Z-Intake Tube is Plastic and does not heat soak like metal intake tubes. Less heat means more Horse Power! The Pop Charger Heat Shield has a cut out to use the front air intake scoop as well as draw in air from the front of the bumper.
This intake gives you a Roaring sound from your engine bay as well as a "PSSSSSSSSP" sound when hitting the throttle."