G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Blacking Out door handles

Old Nov 29, 2006 | 01:06 PM
  #16  
nadir's Avatar
Registered User
Joined: Jun 2006
Posts: 273
Likes: 2
From: SJ, NOR☆CAL
Originally Posted by tkman00
they make that also, but it doesnt work as well or look as good

hmm im talkin more about a tint vinyl like the overlays that bat produces.

With a heatgun, i'm sure u can get em on pretty good.
 
Reply
Old Dec 2, 2006 | 03:31 PM
  #17  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
Originally Posted by Floyds_racing
Does anyone know the best way to go about painting or whatever way to cover the chrome on the door handle? I am also wanting to but a driver side rear handle in the front to eleminate the key whole. Does anyone know of anyone that has done either one of these?

Tyson
I took mine to body shop and hand them removed & painted...
 
Attached Thumbnails Blacking Out door handles-dark-trim-dvr-rear-angle.jpg   Blacking Out door handles-dark-trim-dvr-rear-angle-2.jpg  
Reply
Old Dec 2, 2006 | 04:18 PM
  #18  
Floyds_racing's Avatar
Thread Starter
|
Banned
iTrader: (26)
Joined: May 2006
Posts: 1,404
Likes: 0
From: Pasadena, TX(Houston)
Originally Posted by OCG35
I took mine to body shop and hand them removed & painted...
what color are they?
 
Reply
Old Dec 2, 2006 | 04:39 PM
  #19  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
Originally Posted by Floyds_racing
what color are they?

smoked anodized... pics suck, looks better in person… Originally the project was black chrome – long story (posted out here somewhere) that didn’t work out and this color was the best choice to tie in with some other stuff I did.
 
Reply
Old Dec 2, 2006 | 05:56 PM
  #20  
Vengar's Avatar
Registered User
Joined: Feb 2005
Posts: 65
Likes: 0
ocg is that the Grey Ghost?
 
Reply
Old Dec 2, 2006 | 06:24 PM
  #21  
HwyDrftr's Avatar
Registered User
iTrader: (7)
Joined: Oct 2005
Posts: 556
Likes: 4
From: SoCal - the 51st State!
OCG, that looks sweet, who did it and how much? If I may ask.


I been searching for some sort of chrome stain for that hyper black look, any one know if something like that exists?
 
Reply
Old Dec 2, 2006 | 09:52 PM
  #22  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
Originally Posted by Vengar
ocg is that the Grey Ghost?
yep
 
Reply
Old Dec 2, 2006 | 10:03 PM
  #23  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
Originally Posted by HwyDrftr
OCG, that looks sweet, who did it and how much? If I may ask.


I been searching for some sort of chrome stain for that hyper black look, any one know if something like that exists?
Alliance Auto Collision in Costa Mesa... referred by Sammy at Stillen (they send some of their work there). I forget the total cost... a few hundred – they won’t do it again, great place and they guys that work there are real cool but the owner told me flat out he wouldn’t’ do it again... it was a huge ordeal! Originally they were going to just take off all the trim and door handles so I could powder coat the same color as wheels and grille, when the parts were off I realized there is all kinds of molded plastic behind the aluminum so it can't go in the over for powder coat baking... so then I tried and tried and tried to find a way to paint to get a true black chrome look like the emblems in the pics attached... the only way to do that is to spray with clear coat that has a tinge of black mixed - I saw some pieces and it just didn’t look right so I looked for a regular paint color that I could tolerate and ended up with smoked anodized... trial and error - I like the fact that no one else has a car like mine though.
 
Attached Thumbnails Blacking Out door handles-inverted-badging-close-up.jpg   Blacking Out door handles-gg-full-rear-smoked.jpg  
Reply
Old Dec 3, 2006 | 01:01 AM
  #24  
HwyDrftr's Avatar
Registered User
iTrader: (7)
Joined: Oct 2005
Posts: 556
Likes: 4
From: SoCal - the 51st State!
I like the fact that no one else has a car like mine though.
Heh, I guess smoked anodized is out.

ty for the info
 
Reply
Old Dec 3, 2006 | 03:14 AM
  #25  
Vengar's Avatar
Registered User
Joined: Feb 2005
Posts: 65
Likes: 0
holy **** OC I saw your car at a stillen get together over a year ago or so...I thought that was the most stylish car there....mega props man...great car
 
Reply
Old Dec 3, 2006 | 08:47 PM
  #26  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
Originally Posted by Vengar
holy **** OC I saw your car at a stillen get together over a year ago or so...I thought that was the most stylish car there....mega props man...great car
Wow, quite a compliment thanks! Are you referring to the most recent Stillen meet (May '06) or the one previous one (June '05)? The car was a bit different in '05... It's basically the same now as it was at the last Stillen... I do have a few things lined up though.

Hope to see you at some of the upcoming events! Are you going to Team Transports Toys for Tots car show?
 
Reply
Old Dec 3, 2006 | 08:56 PM
  #27  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
Originally Posted by HwyDrftr
Heh, I guess smoked anodized is out.

ty for the info
Honestly, I don’t think I'd do it over again... it really is a pain in the @ss... which is why Alliance won’t do it again - the car sat for like a week while I was searching and figuring out what to do... plus it wasn’t a priority for them... If it would have worked out as planned, them simply taking everything off, keeping the car 1-2 days while I get it powder coated then they put back on it would have been peachy! But it was a phucking debacle.

I looked into vinyl laminates... there is a place in H.B that I spoke with (I forget the name) - but they didn’t have the color I wanted and I wasn’t sure how it would turn out... I have heard the BMW guys have done that to darken/black out their trim.

Maybe Bat (bluebatmoble) will start selling a kit! That would be a hit (IMO). I really wanted to have the trim done just like the black-chrome emblems, but the guy I use for emblems said his guy wouldn't do it. Which sucks because the emblem is plastic, so whatever process they use to black-chrome the emblems would work on the trim.

Anyway - let us know if you back yours out... Good luck.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jsimonk
General Media Share
17
Dec 22, 2023 03:49 PM
skippyG
G35 Sedan V36 2007- 08
9
Jan 25, 2016 01:18 PM
willdogs
G35 Sedan V36 2007- 08
24
Dec 8, 2015 11:32 AM
laksjd84
Accessories
0
Jul 24, 2015 12:37 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:28 PM.