She has twins, greddy twins that is...
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix

Have not done a re-tune or anything in about a year.
Last time it made 649qhp and 651wtq on race gas, at 20psi without the meth kit hooked up.
It made 538whp and ~520wtq on 91 pump gas at ~13.5psi.
I only took it to the quarter mile once. It was in full street trim with the 20's, street tires, full system (2 JL 12's amps, amp rack, spare tire, etc) and 3/4 of a tank of gas. I could not get any traction in 1st or 2nd gear and still ran a 12.3 at 126.5mph. With better axles and some drag radials or slicks I think the car could be in the mid to low 11's and maybe in the 130's.
Tim, thanks for the coupe seat and helping me install it too. You r awsome and the coupe seat r awsome too and in fact my wife hates it and she refuse to sit in my car now ha ha ha (got my wish come true).
I fixed the monitor and no clue what I did since I just unplug all power and messed up cable under the seat and put it back on with some tape and make it nicer look and the color showed up weird I know.
I guess next project will be lowering my car as u suggested. If u have parts or know someone for reasonable price let me know please. Thanks again.
I fixed the monitor and no clue what I did since I just unplug all power and messed up cable under the seat and put it back on with some tape and make it nicer look and the color showed up weird I know.
I guess next project will be lowering my car as u suggested. If u have parts or know someone for reasonable price let me know please. Thanks again.
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix

Glad you like them! 
If you decide to raise up the passenger side seat you can just get longer bolts and some spacers.
Man with that body kit I would be scared to lower it. Your car looks high when it's parked but when it's driving it looks very clean. I would consider getting larger wheels instead of lowering it. I'm just afraid you will rip that front or those sides off the car.

If you decide to raise up the passenger side seat you can just get longer bolts and some spacers.
Man with that body kit I would be scared to lower it. Your car looks high when it's parked but when it's driving it looks very clean. I would consider getting larger wheels instead of lowering it. I'm just afraid you will rip that front or those sides off the car.
My rear tire is 275/30 19. Maybe get 20 with same size of tire could raise the gap 1" hmmmm. I like the seat low like that so I guess I'm just gonna leave at that.
Thanks tim, I probably won't drop the car then since yeah I'm scare if it scratching the kits.
Thanks tim, I probably won't drop the car then since yeah I'm scare if it scratching the kits.
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix

It's almost like that body kit is made for those who don't want to lower their cars. You just need some 20's with big tires or 22's with tiny tires to fill that gap.
hey timmah !!! I met you once at Happy Valley towne center once a long time ago. I was in a dropped garnet G35 sedan on 20s. I have to say I am so amazed at how far you have taken this build. You are hardcore.
Tim, just wanted to say your car looks awesome in Modified Mag! Really good article as well. Nice to see a sedan gracing the cover with a nice article. Now other people besides the guys on G35driver can appreciate your work!
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix

Hey, I remember! Are you still in the Phoenix area?
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix

It made cover!?! Sweet!!!

I have not received it yet. I helped a little with the article but have not seen the finished pictures or anything yet.



