She has twins, greddy twins that is...
#2101
Tim I found some more info on that 90mm TB.
This is from my350z.
And both those parts can be bought here. http://www.trademotion.com/partlocat...&siteid=214727
This is from my350z.
And both those parts can be bought here. http://www.trademotion.com/partlocat...&siteid=214727
I just changed to the Cosworth intake plenum. It's inlet is about the same size as the TB so I don't see how this can really help a forced induction application without boring out the plenum as well. Otherwise it is a big bottleneck.
#2102
There was a an ad for a used one under $600 not too long ago locally here. I missed it.
#2103
#2104
Thanks.
They were named Kurookie and unfortunately they were a limited run which all were sold. I have a spare black one with some dings that I used for a while in my garage and have been thinking about selling it.
#2105
I got mine new from Injected performance. If you can find one used for $600 that is an amazing deal and you better jump on it. Most I see sell for at least $800 used.
So far it has not been re-tuned, need to get down there and do that.
Pics will come soon, just haven't had time to get any.
#2106
#2107
#2108
ill Sedan
iTrader: (87)
#2109
#2110
the G-POWER M5 is 750hp not whp it has a top speed of 228.4 mph
you should try to beat the worlds fast sedan speed
#2112
#2113
#2114
Sorry, no I don't. I looked around on the net, HID Planet and talked to some guys on here. Once you open them up, you'll understand. It's not hard but takes a lot of time. IMO anyone can do it, you just have to be patient and don't rush anything.
#2115
If an AWD Ford Sierra that's looks like a wooden box on wheels can reach 200+ I see no reason a G sedan cant. At least a G sedan spent actual time in a wind tunnel.
If I'm lucky enough I'll get to the point where I can try it. I need 20" wheels, a final drive, good tires, a built motor and an SP TT kit running a Haltech or ProEFI but I'm not sure ProEFI controls the variable valve timing on the Revup.
Last edited by Andrei; 05-18-2010 at 10:16 PM.