Does anybody know where to find a walkthrough for this? I've never done it and I need to soon! THanks a lot

 

Just carefully pry up along the bottom edge of the plastic strip along the door handle. Under there you will see the 2 screws. You also have a small plastic square cover in the latch/lock area that has to be pryed out. There is another screw under there. After those are out, you can begin pulling along the bottom to remove the panel from the clips. After all of them are pulled free, lift the panel off of the window ledge and remove the electrical connectors to set it aside. Takes about 5 minutes.

 

Can these panels be broken down into smaller parts in order to re wrap upholstery?