G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

G-Coupe/350Z Factory Brembos fit on Sedan?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 19, 2007 | 03:38 PM
  #1  
qbturbo's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Sep 2006
Posts: 437
Likes: 1
From: Queens, NYC
G-Coupe/350Z Factory Brembos fit on Sedan?

I saw one member on the GSedan forum with this setup. I just want to know if anyone else has done this set up. Is it a direct bolt on, or is modification needed? I am in the market for a 2004 X and wanted to know if the Brembo Setup, Front and Rear would fit, Thanks in advance.
 
Reply
Old Jan 19, 2007 | 04:11 PM
  #2  
ORANGEBSRT's Avatar
Registered User
Joined: Nov 2006
Posts: 594
Likes: 0
From: ATL/ORL
i know it's a direct bolt up for the RWD. Don't know bout AWD
 
Reply
Old Jan 19, 2007 | 04:16 PM
  #3  
qbturbo's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Sep 2006
Posts: 437
Likes: 1
From: Queens, NYC
Thanks for confirming at least the RWD bolt up. Anyone else know of someone who has these on an AWD Sedan? If it bolts up to RWD it should also bolt up to the AWD Sedan, unless the hub, spacing or there is some other difference between the AWD and RWD brake set up.
 
Reply
Old Jan 19, 2007 | 04:16 PM
  #4  
Gdup35sedan's Avatar
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach
Premier Member

yes, it is a direct bolt on even for the X. The X 03-05 all have the same sized brakes as the coupes 03-04. no modification needed, just have to make sure your wheels will work with the bbk.
-GP-
 
Reply
Old Jan 19, 2007 | 04:36 PM
  #5  
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member

Yes, from what I know they will fit. As long as you can confirm the X has the same PN brakes as the rwd you are good. Depending on the deal you find, I would consider an aftermarket BBK. The oem brembos are only 12.8".
 
Reply
Old Jan 19, 2007 | 05:07 PM
  #6  
qbturbo's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Sep 2006
Posts: 437
Likes: 1
From: Queens, NYC
Thank you all for your informative contributions!!! Thanks ttrank, but I don't plan on doing much to make the X faster, just want an OEM upgrade like the Brembos F & R with the 4 piston calipers in the front for a little show and performance. Besides the deal is pretty good in comparison to a new BBK just for the Front. Thanks again!!! Oh, I plan on running 19x8.5, 35 offset, wheels all around, I think that's enough to clear the Brembo Calipers in the front, right?
 
Reply
Old Jan 19, 2007 | 06:25 PM
  #8  
SFG356MT's Avatar
Registered User
Joined: Apr 2005
Posts: 425
Likes: 0
From: BayArea
qbturbo, how much and where are you getting the Brembos for if you don't mind me asking?
 
Reply
Old Jan 20, 2007 | 12:09 AM
  #10  
qbturbo's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Sep 2006
Posts: 437
Likes: 1
From: Queens, NYC
Sorry guys, $1,800, local junk yard in NYC. Good Deal? 4 Calipers, 4 rotors, 4 lines, 4 pads. Really good condition, car had less than 10k miles that they came off.
 
Reply
Old Jan 20, 2007 | 12:47 AM
  #11  
Gdup35sedan's Avatar
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach
Premier Member

Originally Posted by qbturbo
Sorry guys, $1,800, local junk yard in NYC. Good Deal? 4 Calipers, 4 rotors, 4 lines, 4 pads. Really good condition, car had less than 10k miles that they came off.
If it's at a junk yard, you should be able to talk em down to $1500. If you can, that's a steal for a full oem brembo system with only 10k miles on it.
-GP-
 
Reply
Old Jan 20, 2007 | 01:20 AM
  #12  
ILLicit's Avatar
Registered User
Joined: Sep 2006
Posts: 1,918
Likes: 9
From: Brooklyn, NYC
Sup dude, you're getting them from saw mills?

I'd suggest you talk to them, tell em you saw them sell for cheaper online, not only is 1500 a lil too much, but 1800 is OD.

http://cgi.ebay.com/ebaymotors/Bremb...QQcmdZViewItem

Talk them down to like... $1200-1250, $1300 MAX.
 
Reply
Old Jan 20, 2007 | 01:45 AM
  #13  
E_K's Avatar
E_K
Registered User
iTrader: (15)
Joined: Aug 2003
Posts: 1,846
Likes: 9
From: Toh-rensa,Ahteesia,Ahcadia,Montree Pak, Longa Beacha
Originally Posted by X-Vert
Sup dude, you're getting them from saw mills?

I'd suggest you talk to them, tell em you saw them sell for cheaper online, not only is 1500 a lil too much, but 1800 is OD.

http://cgi.ebay.com/ebaymotors/Bremb...QQcmdZViewItem

Talk them down to like... $1200-1250, $1300 MAX.
Only one problem with that auction....those were Sentra Brembos. They won't work on the G35 without custom rotors and other miscellaneous modifications.
 
Reply
Old Jan 20, 2007 | 01:53 AM
  #14  
ILLicit's Avatar
Registered User
Joined: Sep 2006
Posts: 1,918
Likes: 9
From: Brooklyn, NYC
Really? nvm then

But I saw an entire g35 brembo set on ebay end for about $1100 before, that was a few months ago.
 
Reply
Old Jan 20, 2007 | 02:03 AM
  #15  
E_K's Avatar
E_K
Registered User
iTrader: (15)
Joined: Aug 2003
Posts: 1,846
Likes: 9
From: Toh-rensa,Ahteesia,Ahcadia,Montree Pak, Longa Beacha
$1100 is a very good deal, and yeah, I saw that one on ebay. But don't expect to get the Brembos at that price. A set in good condition usually goes for close to $1300-$1500+ on ebay.

I got a set of rear Brembo calipers brand new for $500 a few years ago in ebay. My front red Brembos were $700 from ebay (really overpaid about $200 for those).
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:00 AM.