Attempt #2 Tein CS Coilovers
#33
Originally Posted by GEE PASTA
Tim
I had the wifey ship the parts today (Saturday) for Tuesday delivery
You should get the EDFC early. This setup will take more time than installing the coil overs.
Please, pre test all units before installing. Running the cables is the tuff part of the install.
The effort is worth the results. Dennis
I had the wifey ship the parts today (Saturday) for Tuesday delivery
You should get the EDFC early. This setup will take more time than installing the coil overs.
Please, pre test all units before installing. Running the cables is the tuff part of the install.
The effort is worth the results. Dennis
I didn't even see this post until today so I was shocked they came so fast.
Thanks again!!!!!!
You rock!
BTW, I will test everything tonight.
#35
#37
#38
i just ordered a brand new set with edfc from jscspeed! if anyone is looking into a new set of anything contact tim (jscspeed) for the most unbelievable prices (believe me im a marketplace lurker) ....not that im going to be doing the full install but i could use some tips as to where to run the edfc wires through and such? and does anyone know if the edfc box is available in black???
ps...if anyone wants some apex n1 coilovers let me know! theyll be up fs soon
ps...if anyone wants some apex n1 coilovers let me know! theyll be up fs soon
#40
Originally Posted by chobble19
i just ordered a brand new set with edfc from jscspeed! if anyone is looking into a new set of anything contact tim (jscspeed) for the most unbelievable prices (believe me im a marketplace lurker) ....not that im going to be doing the full install but i could use some tips as to where to run the edfc wires through and such? and does anyone know if the edfc box is available in black???
ps...if anyone wants some apex n1 coilovers let me know! theyll be up fs soon
ps...if anyone wants some apex n1 coilovers let me know! theyll be up fs soon
You can get the EDFC box in black now. If you got a new set it should have been a choice.
You can run the rear wires down each side and the front wires through the same spot as the main engine harness.
#41
I installed them yesterday but still need to run the EDFC lines and hook up the controller. I'm not sure where they are set right now but they are softer than my progressive H&R springs. The springs were not bad at all but it will be nice to have some control. Going to finish up the controller tonight and put on my rear camber kit that has been in the garage for almost a year. Then get an alignment tomorrow to see how it all comes out.
I'll post pics and final results this weekend.
I'll post pics and final results this weekend.
#42
Banned
iTrader: (26)
Join Date: May 2006
Location: Pasadena, TX(Houston)
Posts: 1,404
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ttrank
I installed them yesterday but still need to run the EDFC lines and hook up the controller. I'm not sure where they are set right now but they are softer than my progressive H&R springs. The springs were not bad at all but it will be nice to have some control. Going to finish up the controller tonight and put on my rear camber kit that has been in the garage for almost a year. Then get an alignment tomorrow to see how it all comes out.
I'll post pics and final results this weekend.
I'll post pics and final results this weekend.
#43
#44
Originally Posted by ttrank
I installed them yesterday but still need to run the EDFC lines and hook up the controller. I'm not sure where they are set right now but they are softer than my progressive H&R springs. The springs were not bad at all but it will be nice to have some control. Going to finish up the controller tonight and put on my rear camber kit that has been in the garage for almost a year. Then get an alignment tomorrow to see how it all comes out.
I'll post pics and final results this weekend.
I'll post pics and final results this weekend.