M3 Killer
M3 Killer
Hi Sedan owners,
Found this on Freshalloy.com, it's a Vortech supercharged G35 Sedan, I love the whine of the supercharger.. anyways check it out.
http://www.audioenvy.com/sedansc.wmv
<font color=white>Pearl Ivory</font color=white> G35 Coupe 6MT Prem/SplashG/BSM, <font color=red>Injen CAI</font color=red>, <font color=red>Injen Super SES</font color=red>
Found this on Freshalloy.com, it's a Vortech supercharged G35 Sedan, I love the whine of the supercharger.. anyways check it out.
http://www.audioenvy.com/sedansc.wmv
<font color=white>Pearl Ivory</font color=white> G35 Coupe 6MT Prem/SplashG/BSM, <font color=red>Injen CAI</font color=red>, <font color=red>Injen Super SES</font color=red>
Re: M3 Killer



<font color=white>Pearl Ivory</font color=white> G35 Coupe 6MT Prem/SplashG/BSM, <font color=red>Injen CAI</font color=red>, <font color=red>Injen Super SES</font color=red>
Re: M3 Killer
props to zimbo from freshalloy.com
<font color=white>Pearl Ivory</font color=white> G35 Coupe 6MT Prem/SplashG/BSM, <font color=red>Injen CAI</font color=red>, <font color=red>Injen Super SES</font color=red>
<font color=white>Pearl Ivory</font color=white> G35 Coupe 6MT Prem/SplashG/BSM, <font color=red>Injen CAI</font color=red>, <font color=red>Injen Super SES</font color=red>
Joined: Jun 2002
Posts: 30,341
Likes: 9
From: Cambridge, Ont. Canada
Re: M3 Killer
God, I love the whine of an SC too!
-T
'03 Sedan 5a: BS/G, Prem, Aero/Body, Sport, Nav
Click for MODS or Vote at Online Showoff
-T
'03 Sedan 5a: BS/G, Prem, Aero/Body, Sport, Nav
Click for MODS or Vote at Online Showoff
Re: M3 Killer
Hey thank, guys! My perception has been that there isn't as much interest in the Vortech unit on this board as there is on FreshAlloy and My350Z so I haven't been keeping y'all as up-to-date as I should.
--Steve
--Steve
Re: M3 Killer
I called Vortech today about their SC kit for the Sedan Auto and the sales rep was asking me if I wanted to be the test car for this kit. Apparently, they are looking for test cars so they can develop it specifically for the Auto Sedan. However, I live in Northern Cal. otherwise i would volunteer my car.
If anyone who lives down Southern Cal. w/ an Auto Sedan interested in this, Pretty Pls. volunteer your car so they can develop the kit!
If anyone who lives down Southern Cal. w/ an Auto Sedan interested in this, Pretty Pls. volunteer your car so they can develop the kit!
Trending Topics
Re: M3 Killer
Actually I'm really interested but I'm being kept up to date by your maxima buddy blu on the maxima boards. Anyway, keep us up to date. I'm getting a vicarious thrill from your supercharged adventure (until I get my G35 sedan [img]/w3timages/icons/laugh.gif[/img])
Re: M3 Killer
Interesting... I know that even the 5AT 350z requires significant custom work with the current Vortech 350Z kit to make it fit, so getting the 5AT sedan to work will be very interesting--especially with the whole fan issue.
In retrospect, I guess Vortech should thank me for being the unofficial, unsolicited guinea pig for the 6MT sedan. I never actually talked to them--but they expressed a great deal of interest when they last spoke to my installer. It's clear that they didn't know the specific differences between the 350Z and the G35. For one thing, the pinout diagram for the piggyback ECU was totally worthless (because the wire order is apparently different between the G35 and the Z). A number of other subtle changes were required as well--but my installer was fabulous and had a great "figure it out" attitude.
I couldn't be happier at this point. But, of course, disaster is only one blown engine away so it's still a qualified success.
--Steve
In retrospect, I guess Vortech should thank me for being the unofficial, unsolicited guinea pig for the 6MT sedan. I never actually talked to them--but they expressed a great deal of interest when they last spoke to my installer. It's clear that they didn't know the specific differences between the 350Z and the G35. For one thing, the pinout diagram for the piggyback ECU was totally worthless (because the wire order is apparently different between the G35 and the Z). A number of other subtle changes were required as well--but my installer was fabulous and had a great "figure it out" attitude.
I couldn't be happier at this point. But, of course, disaster is only one blown engine away so it's still a qualified success.
--Steve
Re: M3 Killer
To answer questions about cost and maintenance.
I think any supercharger requires you to spend a few minutes every so often (once a week, maybe) just doing a visual inspection to make sure that belts are working fine, etc. I also think it is wise to replace spark plugs with regularity (every 10K miles) rather than just leaving them in for the 100K that you would with a stock G. The Vortech kit uses the same oil as the engine, so you just need to make sure to get regularly scheduled changes every 3000 miles.
As far as cost goes, you can contact www.cpracing.com to see what they'll sell the unit for. I got an extra good deal because mine was the first unit they had sold and Vortech was offering incentives to its authorized dealers who would commit to early purchase.
Install cost will vary, but you should plan on about 20 hours of labor and I wouldn't even consider having someone do it who doesn't have the software necessary to program the ECU piggyback chip while tuning the car on a dyno.
--Steve
I think any supercharger requires you to spend a few minutes every so often (once a week, maybe) just doing a visual inspection to make sure that belts are working fine, etc. I also think it is wise to replace spark plugs with regularity (every 10K miles) rather than just leaving them in for the 100K that you would with a stock G. The Vortech kit uses the same oil as the engine, so you just need to make sure to get regularly scheduled changes every 3000 miles.
As far as cost goes, you can contact www.cpracing.com to see what they'll sell the unit for. I got an extra good deal because mine was the first unit they had sold and Vortech was offering incentives to its authorized dealers who would commit to early purchase.
Install cost will vary, but you should plan on about 20 hours of labor and I wouldn't even consider having someone do it who doesn't have the software necessary to program the ECU piggyback chip while tuning the car on a dyno.
--Steve
Re: M3 Killer
I'll have to double check, but I have a G35x, which is currently only available in 5AT. When I was putting in the K&N drop-in, I don't recall seeing a regular fan, only an electric one. I check tomorrow morning.




<font color=red>G</font color=red>S<font color=green>M</font color=green> <font color=black>Silverstone Coupe</font color=black>
