Seat Swap Coupe to Sedan
Originally Posted by R2 V35
What happened to Clinster?
Originally Posted by Socal_G_sedan
Aw shucks, I found a pair of Z leather seats local for $400 and was gonna do the switch now I guess I cant. I was going to deal with the loss in power seats but it wont drop in, then nevermind!


Originally Posted by ttrank
Did you try them?
I know Tyson helped his cousin put a set of coupe seats in a Z and he said the fit.
I know Tyson helped his cousin put a set of coupe seats in a Z and he said the fit.
The floor board is physically different between the G and the Z. A spacer is needed to rase one side. I'm reasonably sure the holes do line up otherwise. Not a direct drop-in to say the least. This was based on the knowledge several years back, but I wouldn't think the floor pan has been revised since.
It would be interesting to know what exactly Tyson did to make one fit.
He told me it was a direct swap. I know the pass coupe seat I have is quite low and could use spacers to raise it up a bit. I think the Z seat might be the same.
If I had any friends local with a Z i would try it.
If I had any friends local with a Z i would try it.
Boy I really had to dig deep for this one. This is the original post I made nearly 3 years ago:
https://g35driver.com/forums/showthr...ght=350Z+seats
A lot have since transpired to say the least. It is entirely possible I was mislead back then about 350Z seats not working in the G35.
Sure enough I now see the pic of Tyson's pic of the 350Z w. the G35 coupe seat. Very interesting! Again it's been 3 years and memory has never been my forte.
None the less, as I try to think real hard, I believe it was actually the passenger-side floor board that was slightly off between the 350Z and the G35. I insisted on having a matching set of front seats, so the coupe seats were the ticket then.
Did Tyson also have the passenger seat swapped?
https://g35driver.com/forums/showthr...ght=350Z+seats
A lot have since transpired to say the least. It is entirely possible I was mislead back then about 350Z seats not working in the G35.
Sure enough I now see the pic of Tyson's pic of the 350Z w. the G35 coupe seat. Very interesting! Again it's been 3 years and memory has never been my forte.
None the less, as I try to think real hard, I believe it was actually the passenger-side floor board that was slightly off between the 350Z and the G35. I insisted on having a matching set of front seats, so the coupe seats were the ticket then.
Did Tyson also have the passenger seat swapped?
Last edited by THX723; Aug 1, 2007 at 09:28 PM.
Rly? Both driver and passenger side fits!? I stand corrected then.
That is good news for the sedan owners.
Oh and you're welcome w. the leg work. It was well worth the trouble.
That is good news for the sedan owners.

Oh and you're welcome w. the leg work. It was well worth the trouble.
the ones i found local aret non-power seats that came in the track model. It was rewrapped in two-tone black/silver leather. I talked to price down to $375 but losing power/memory ona luxury sedan is not making me feel any better about pulling the trigger on it.
I could prob live w/out the memory if I had to since I'm the only one who drives my car, but I would hate to lose power. Are the track seats different than the others? Are they not available w/ power?
Originally Posted by 04NismoV35
I could prob live w/out the memory if I had to since I'm the only one who drives my car, but I would hate to lose power. Are the track seats different than the others? Are they not available w/ power?
There is one on ebay for $100 + shipping but its tan
Last edited by G SEDAN; Aug 2, 2007 at 01:32 PM.
hey i was looking to get myself a set of sedan seats. will everything work with no problems on this swap ? my main question is will the recline button work ?
also will the newer sedan seats work in my 03 coupe ? have anyone done this yet ?
also will the newer sedan seats work in my 03 coupe ? have anyone done this yet ?




