Need a little help W/suspension guys - Page 2 - G35Driver

Mar 29, 2008 | 08:57 PM

#16

MikeYo

Registered User

iTrader: (37)

Joined: Dec 2007

Posts: 3,577

Likes: 12

From: South Florida

stock height...

Mar 29, 2008 | 09:24 PM

#17

canucklehead

Registered User

Joined: Feb 2007

Posts: 1,067

Likes: 3

From: West Coast Canada

Quote:

Originally Posted by Hotnikks

How's your car ride on the 225's? That's what I wanted to get but got talked into keeping the oem sizes.

it rides great with more traction in cornering. the size looks perfect on the stock sport 17's. i almost went for the 235/50 combo but was worried the sidewalls would bulge too much. once i swap in the Z suspension any fender gaps will look fine...

Apr 5, 2008 | 03:20 PM

#18

Tollboothwilley

Former G35driver Vendor

iTrader: (32)

Joined: Jan 2008

Posts: 3,684

Likes: 28

From: Vegas

Quote:

Originally Posted by Hotnikks

^^yeah that's exactly right just sometimes. I'll be sure to check those out. What do they need a little retightening? Is there any torque specs on those or no?

I'd have to check the manual about torque specs. Normally I'd just say tighten them as snug as they were when you took them off. As for the sound, you probably have to replace them. Just replace them when you get new sways, unless you already have them.

Apr 5, 2008 | 09:48 PM

#19

Hotnikks

Thread Starter

Registered User

Joined: Dec 2006

Posts: 153

Likes: 0

From: NYC

canucklehead
Thanks for the update!

tollbooth
they are oem swaybar endlinks. I 'll have to get under there and check them out. Thanks for the replies guys

Apr 5, 2008 | 10:27 PM

#20

SickGs

Registered User

Joined: Aug 2007

Posts: 18

Likes: 0

If anyone thinks their sedan is just below stock ride height, someone may have installed eibach pro kits they are only a very moderate drop, about an inch. I bought my G and I was never sure. When I put my H&R/Koni setup on i found out I had the pro kits.