quick question... headed to autozone - G35Driver - Infiniti G35 & G37 Forum Discussion

Apr 13, 2008 | 10:13 AM

g35tl600rr

Thread Starter

Registered User

Joined: Jan 2008

Posts: 37

Likes: 0

quick question... headed to autozone

what is the screw size on the splash guard cover under the car? several came off last night and now its draging.(the ones you remove to change the oil) thanx

Apr 13, 2008 | 10:17 AM

HUMBOLDT_G

Registered User

Joined: Aug 2007

Posts: 306

Likes: 0

Maybe you should pull out one that is still in there to find out. If the clips are stripped you may need to go to a bigger size.

Apr 13, 2008 | 10:19 AM

citymunky

Registered User

iTrader: (44)

Joined: Apr 2006

Posts: 3,038

Likes: 14

From: Chesapeake, VA/The Bronx, NY

Go to NAPA, with one of the bolts, and get you some new ones

Apr 14, 2008 | 04:49 PM

JMAN44544

Registered User

Joined: Aug 2006

Posts: 198

Likes: 0

From: Near Boston, MA

I know they are 10 mm heads, and when you are lying on a creeper loosening them, it feels like there are 400 of them.

Apr 14, 2008 | 05:44 PM

Idyfohu

Registered User

iTrader: (10)

Joined: Jun 2006

Posts: 433

Likes: 0

From: Salt Lake City, UT

Quote:

Originally Posted by JMAN44544

I know they are 10 mm heads, and when you are lying on a creeper loosening them, it feels like there are 400 of them.

They are 10mm.

I was thinking it was going to be worse, but it wasn't bad at all. Just loosen them with a 10mm socket and then use a powerdrill with a philips extension to extract them. Cake.

Apr 14, 2008 | 08:17 PM

Carlito

Registered User

iTrader: (1)

Joined: Jul 2007

Posts: 154

Likes: 0

From: Barbados

Quote:

Originally Posted by Idyfohu

They are 10mm.

I was thinking it was going to be worse, but it wasn't bad at all. Just loosen them with a 10mm socket and then use a powerdrill with a philips extension to extract them. Cake.

10mm head, but likely a M6 thread. Was trying to find the part but somehow it's not coming up.