I am about to install a set of Autovation pedals covers on the car. The instructions mention that it may be possible to remove the hard plastic cover that is on the gas pedal. For those who have installed these, were you able to remove the plastic cover or did you install the aluminum cover on top of the plastic?


*'03.5 MT6 Sedan, Premium, CB*

*'00 Saleen S281-SC* http://members.cardomain.com/headpaneer

What? No one here has installed these?

*'03.5 MT6 Sedan, Premium, CB*

*'00 Saleen S281-SC* http://members.cardomain.com/headpaneer

I installed it over the plastic piece. I believe it is a solid piece which can't be detached other than completely off the peddle assembly.

Clint (THX723)

I bought a set of drilled aluminum pedals from Grubb's
Infiniti. I removed the stock accelerator pedal. There is a clip
on the back that holds it to the metal bar. Very easy to remove.

2003 TwBlue 5AT Sedan, sunroof,
Graphite Leather, splashguards, HKS exhaust,
14 wire Grounding kit, 350Z duct, Stillen CAI
Underbody rear diffusers, Drilled alum pedals

Those are the OEM Z pedals, which does replace the entire unit. The Autovation Gas pedal needs to screw onto the existing plastic gas pedal.

Clint (THX723)

the gas pedal from autovation just gets screwed on. drilling through the other metal pedals is not fun, est. time is more than the 30 mins or so they say.

coolie

2003 G35 Sedan 5AT
{Z-Tube} {JWT_POP_Chrgr.} {V1} {21%_Tint} {Matte_Race_Pdls} {Blck_w/Grpht_Lthr} {Prm_Pkg.} {Sprt_Tuned} {Wntr-Sprt} {Nav.} {Xenon} {Sunroof} {Aero-Body_Kit_w/Spoiler} {Trunk_Mat}