Sedan mirror turn signals
Yeah wires are a pain to run into the doors. They use a bulkhead connector so to do it the clean way you have to drill a small hole in each side and run the wire through it. That's how I installed my window modules.
This is what the guy that is selling them emailed me about how they install.
It will replace your mirror cover like original. You'll have to dettach the original mirror cover & replace on the new signal mirror covers. The way to fit it on is exactly the same as the original one.
It will replace your mirror cover like original. You'll have to dettach the original mirror cover & replace on the new signal mirror covers. The way to fit it on is exactly the same as the original one.
that's a different one then cause the ones i have go over your existing mirror, hence the cover part, and like i said earlier you drill 2 holes on your actual mirror assembly to receive the cover.
Originally Posted by 04whiteG35x
I would like to hear about the issues or lack thereof on these mirrors!
Originally Posted by G35sedan03
i never had any. two holes, one screw plus doublesided tape, the thing is solid on your mirror. never had any issues almost 4 years later.
scroll up for pics. also a great thing about these covers is that they are color matched already to your car's paint code. no need to getthem painted. i got mine from www.japanparts.com
No one has found the kind that have the turn signal in the actual mirror (the reflective part, the actual mirror)?... I doubt there are any that will work for our mirrors, but that’s what I want.
Originally Posted by G35sedan03
nope, have not seen anything like that. unless you buy the led kit that attaches to the mirror. seen it on hondas and stuff.
usually I see them on trucks and suv - but I've seen them on some cars (can't remember what model) - the ones I've seen are OEM, I don;t know if there is an aftermarket... you know what I'm referring to right? The arrow in the mirror




