^lol...awesome!!

 

Ash FTW! lmao

 

I have a 2004 G35x sedan and I have a loud metal snapping noise coming from my driver's side front end. The sound is present at all times and nothing makes it better or worse. It has gotten progressively worse over the last couple of months. My rotors and pads have been changed and my compression rod and cv axle joint assembly has been repaced but the sound is still present and unchanged!!!! I took it to the dealer but they said it was the cv axle assembly which I have replaced. My car has 60K miles on it. Please help!! The noise almost sounds like someone throwing a fork it a garbage disposal as it is being shut off??? I have checked the wheel for movement when it was off the gorund and it seems tight, in fact, everything seems tight!!!

 

Question:

I have an 03 sedan and i just installed 04 coupe suspension ( shocks, springs, control arms, etc)

I can feel a lot less body roll than stock but now my ride is really bouncy. I can feel every little bump in the road. Is that normal?
My rims are stock with stock tires.

Any input will be appreciated.

 

Possibly your '03 set was blown?

 

My stock set had bad strut mounts.

 

03 350z tein s-tech (with 1" cut off front spring and 3/4" cut rear spring mount. Sorry about the bad pic and don't worry I removed the tein sticker. lol

 

What front bumper and lip is this?

 

I herd tein s for 350z will have a extra drop on g sedans? Is that true?

 

Yep. 1" extra on a sedan.

 

So if i buy tein s for 350z it would be a 3in drop front and 2.3 rear drop?? Do you think it will rub, i have stock rims n tires?

 

advertised drop for z s-techs is .6"...so your looking at a 1.6 spring drop front and rear....if you use z shocks/struts you can add another .5 to the full drop front and rear

 

Im changing springs only, so its 1.6 drop all the way around using 350z s tech, that means im better off using s tech for g sedans because its advertize to do 2in front/ 1.3 rear. Any suggestions?

 

i wouldn't run 350z stechs on your stock sedan shocks...you'd murder them in a few months....what you get out of the z springs are outstanding spring rates