wooooo almost done.

Subscribe
Mar 7, 2010 | 07:24 AM
  #1  
i got my midpipe and hr ypipe like 2 months ago?
never got time to put it on until tonight.
worked on it start at like 1 or 2?
got all the bolts and stuff off. had to pb blaster like 4 or 5 times in hour intervals before.
but yeah finally got em off..
super tired so imma put it on the morning
will update with a video later on during the night or week
Reply 0
Mar 7, 2010 | 08:06 AM
  #2  
Yea, please do post a video of your results. Also, what year is you G? I have an 05 and put on an 04 coupe mid the other day. The sound is about 75% of what I was looking for so I hope the hr y pipe would give it that extra tone. How easy was it to find your hr?
Reply 0
Mar 8, 2010 | 01:45 AM
  #3  
im done installing.. it sounds great..
i got the 06 g35 and put on the 04 midpipe...
hmm the HR i found one really quick.
i found mine on craigslist for 90 bucks. so yeah.
what kind of tone are you going for ?
i'll post up the video tomorrow.. since its too dark right now to record. ahah
Reply 0
Mar 8, 2010 | 10:49 AM
  #4  
I am interested in this video too. I have a coupe mid pipe sitting in my room, installed the Z Tube last night and found an HR y pipe that is going to ship today. I was thinking about getting the HKS rear as well. I looked at the sedan exhaust compilation and liked what I heard. Next is the MD 5/16'' spacer to finish this round of mods off before school starts and I will not have the time to f**k with it.
Reply 0
Mar 8, 2010 | 11:24 AM
  #5  
Tip when working with those frozen bolts on exhaust. If you PB Blast it then torch it for about 5 min it should come out easy.
Reply 0
Mar 8, 2010 | 12:02 PM
  #6  
Here is mine with 08 350z HR ypipe and 06 coupe midpipe with stock muffler (my muffler rattle a little bit so that's why I change it)


and this is after I change the muffler with no name brand after market


and this one after I added Megan racing resonated test pipe (took the video too close the audio is destroy will have to take it again and put it further away)

Reply 0
Mar 8, 2010 | 12:27 PM
  #7  
Quote: Tip when working with those frozen bolts on exhaust. If you PB Blast it then torch it for about 5 min it should come out easy.
I did both of these and had a breaker bar on it and still no luck. I had to cut one of the bolts to install mine.
Reply 0
Mar 9, 2010 | 03:37 AM
  #8  
uh oh thats no good.
i got mine off easy...
sprayed pb on the bolts every hour for about 4 hours?
then used my ratchet with a deep socket and yanked it and it came off nicely except one that i kinda stripped from trying with a monkey wrnech before.
but yeah str3zz i saw your video from a while back.. i lvoe the sound on your exhaust..
what did you use to record the sound? it comes out so clearly.
i use my macbook to record and i dont think it comes out clearly enough...
but yeah... heres my video
its with an injen sri, 04 coupe middy, 07 hr y pipe, and megan racing universal m-spec2 exhaust. hope this does you some justice
i'll try to re-record with something else and on a day that isnt so windy...
Reply 0
Mar 9, 2010 | 07:28 AM
  #9  
I use my regular digital camera but just have to put the camera about 10 feet away and just zoom in to look like closer to the car
Reply 0
Mar 9, 2010 | 08:35 AM
  #10  
hmm ur in SD area? how come you don't hit our boards???
Reply 0
Mar 9, 2010 | 06:09 PM
  #11  
what boards?
i didnt even know that..
ahhahha
im still relatively new to this forums still ahahah
Reply 0
Mar 9, 2010 | 08:29 PM
  #12  
https://g35driver.com/forums/san-die...b-gtg-403.html
Reply 0
Subscribe