dirty headlights?!?!!
#17
https://g35driver.com/forums/g35-sed...100-000-a.html
pretty much like this guys pics except mine were alot more foggier toward the top!
where the low beams are!
i will post pic tomorrow of how it looks now
and i just used some cheap ATFluid that my pops used for his 93 pontiac that we had
pretty much like this guys pics except mine were alot more foggier toward the top!
where the low beams are!
i will post pic tomorrow of how it looks now
and i just used some cheap ATFluid that my pops used for his 93 pontiac that we had
#21
I tried this yesterday....didnt take any photos cuz I didnt think it would work to great
I was surprised
Cleaned up most of the yellow-ing right away
I put some on a shop towel and scrubbed for 2-3 min.
Pretty good for a basically free cleaning.
Not as good as the 3M kit if you have really dirty head lights but it does work well
I was surprised
Cleaned up most of the yellow-ing right away
I put some on a shop towel and scrubbed for 2-3 min.
Pretty good for a basically free cleaning.
Not as good as the 3M kit if you have really dirty head lights but it does work well
#22
#25
so this is my girls corolla, the fog couldn't be taken off with plastic x this helped a slight bit more as u can see, but remember, this was taken right after the wipe... its an oil so it will look more clean, i did clean them up afterwards and it was still pretty decent, better than the plastic x sold in stores
Before:
After ATF:
Before:
After ATF:
#28
What about when it's from the inside? Because I tried restoring my headlights awhile ago. The one on the right finished up very nicely, but the one of the left.. it remained foggy no matter what I did.. think it's like dusty on the inside or something.. but is there any other way to get to it besides taking off the whole bumper and all?
plastiX is a nice finisher, but when I restored mine earlier I wet sanded it down a bit with like 1000 grit sandpaper then I used plastiX with a random orbital.
plastiX is a nice finisher, but when I restored mine earlier I wet sanded it down a bit with like 1000 grit sandpaper then I used plastiX with a random orbital.
Last edited by prinny; 09-08-2010 at 02:41 AM.
#30
so this is my girls corolla, the fog couldn't be taken off with plastic x this helped a slight bit more as u can see, but remember, this was taken right after the wipe... its an oil so it will look more clean, i did clean them up afterwards and it was still pretty decent, better than the plastic x sold in stores
Before:
After ATF:
Before:
After ATF:
yeh i used a cheap dry paper towel instead of like bounty!
ill try to take some pics! today! hopefully i can dirty it so it looks like usualy, smoggy, and yellowish film on the light!