ok so ive searched the boards and please correct me if ive missed it, But i been trying to find answers for a few questions.

1. i see everyone say its easy but is there a DIY for removing corner lights (03-04) sedan
2. is it possible to put OEM controls in a metra dash kit instead of the rubber ones?
3. is there a DIY for putting LEDS in the bottom door lights and the lights over to two rear doors (still 03-04 sedan)

Thanks in advance VincenzG35

 

1. Put your hand on the wheel well side of the corner lights and pull outward.
2.idk
3. not really since, its easy to figure out with a flat head to pop the covers off and then you can remove the bulb. The lights on the bottom of the doors will take a bit more force then you would expect.

 

Thank you very much now just got to search for what bulb goes in there

 

^^ It's a 168-194.

 

https://g35driver.com/forums/lightin...ent-guide.html

 

Tian and blue thanks you !

 

Simple answer: no.

That being said. If you were really brave, you might be able to cut the face off the metra buttons and glue the oem buttons on top of them, but you'd have to be VERY careful, and it's doubtful you could get the lights to line-up right.

It wouldn't be easy.