Found a good deal on tires, will they fit??
#1
#3
What If i didnt add the spacer and Neg camber?
I dont really want to run a bumch of neg camber, I would like to stick close to stock.
I am currently running 19x9.5 +40mm w/255/35/19 in the rear and I am fine without rolled fenders. If I have done my calculations correct I should only be pushed out 1mm from the location of my current wheels. The wheel itself I'm not worried about, but the width of the tire that im unsure of.
*Now that I have put more thought into the new tire(285) will in theory be pushed out 16mm more than my current (255). So I need to measure to see how much room I have between the tire now and the fender*
Does that sound right?
Thanks
I dont really want to run a bumch of neg camber, I would like to stick close to stock.
I am currently running 19x9.5 +40mm w/255/35/19 in the rear and I am fine without rolled fenders. If I have done my calculations correct I should only be pushed out 1mm from the location of my current wheels. The wheel itself I'm not worried about, but the width of the tire that im unsure of.
*Now that I have put more thought into the new tire(285) will in theory be pushed out 16mm more than my current (255). So I need to measure to see how much room I have between the tire now and the fender*
Does that sound right?
Thanks
#4
#5
should be perfect w/ those offsets the tires might rub on big bumps but while driving should be good. w/o rolling fenders
nice and flush and you're only on g/z springs
#6
Thread
Thread Starter
Forum
Replies
Last Post
laksjd84
Steering & Suspension
14
08-08-2015 11:47 AM