G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Replacing 03 g35 starter! Please help,

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Feb 20, 2011 | 03:18 PM
  #1  
kylebooth's Avatar
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 48
Likes: 0
Replacing 03 g35 starter! Please help,

Hey, the starter has gone on my 03 g35 sedan, Does anybody know where the starter is located on this car? does anybody have a guide to replace the starter with or without pictures. ( pics would be appreciated) and the last question is does anyone here have a link to a website that would sell OEM starters or high quality starters at fair prices? Thanks alot. You guys has been a huge help in the past and im sure it will be again
 
Reply
Old Feb 20, 2011 | 11:07 PM
  #2  
bound4VIP's Avatar
Registered User
iTrader: (3)
Joined: Jan 2010
Posts: 501
Likes: 13
From: Little Elm, Tx
most starters are on the same side as the battery. easiest thing to do is get under the car and feel around the bell of the transmission.

Btw you can do a search for the factory service manuals and download it (not trying to sound like a D***, just being helpful for you in the future).
 
Reply
Old Feb 20, 2011 | 11:42 PM
  #3  
kylebooth's Avatar
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 48
Likes: 0
thanks a lot for the reply. I got another question. Once you have the starter off the car , or even when its still on the car is there a way to check if the starter is for sure the problem? Thank you
 

Last edited by kylebooth; Feb 20, 2011 at 11:52 PM.
Reply
Old Feb 21, 2011 | 12:41 AM
  #4  
bound4VIP's Avatar
Registered User
iTrader: (3)
Joined: Jan 2010
Posts: 501
Likes: 13
From: Little Elm, Tx
yea take it to autozone (not sure about kragen/o'reily), they can test it for you for free.
I would NOT (i think you can do it, but not sure how much torque the starter has) advise taking it of the xmsn and turning the ignition on to test it. Someone correct me if you can or cant do that, i just take it to autozone.
 
Reply
Old Feb 21, 2011 | 12:44 AM
  #5  
bound4VIP's Avatar
Registered User
iTrader: (3)
Joined: Jan 2010
Posts: 501
Likes: 13
From: Little Elm, Tx
BTW did you find the service manual?
 
Reply
Old Feb 21, 2011 | 12:53 AM
  #6  
AARONHL's Avatar
Registered User
iTrader: (15)
Joined: Oct 2007
Posts: 4,334
Likes: 121
From: ɷCONNECTICUTɷ
Name:  starterFSM.jpg
Views: 16211
Size:  65.6 KB
 
Reply
Old Feb 21, 2011 | 09:51 AM
  #7  
kylebooth's Avatar
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 48
Likes: 0
Thanks guys you have been a big help.
 
Reply
Old Feb 21, 2011 | 10:10 AM
  #8  
Project's Avatar
Registered User
iTrader: (30)
Joined: May 2008
Posts: 6,809
Likes: 31
From: SOVA....PA & NJ
Its an easy job takes about 15 minutes to unbolt. Believe it was three bolts and power cable.

Take it to most auto stores and they can check or you can hook it up to a battery and ground out the starter. It will spin if there is power. You can probably google this check but its easier just to bring it somewhere.
 
Reply
Old Feb 23, 2011 | 03:00 PM
  #9  
kylebooth's Avatar
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 48
Likes: 0
hey i am having trouble finding the starter mounting bolts? can somebody help me out please thanks
 
Reply
Old Feb 23, 2011 | 03:48 PM
  #10  
Tollboothwilley's Avatar
Former G35driver Vendor
iTrader: (32)
Joined: Jan 2008
Posts: 3,684
Likes: 28
From: Vegas
2 mounting bolts that are hold it to the bell housing from the engine side. I believe they are both 14mm. There is also a 12mm nut that holds the power cable to the alt.

It is located on the passenger side and is accessible from under the vehicle.

Make sure you disconnect the battery before you do anything so you don't have a live power wire hanging down there.
 
Reply
Old Feb 24, 2011 | 12:24 AM
  #11  
kylebooth's Avatar
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 48
Likes: 0
If you look at the bottom picture in the right hand corner are the mouting bolts the two ones i have scribbled out in red?
 
Attached Thumbnails Replacing 03 g35 starter! Please help,-starterfsm.jpg  
Reply
Old Feb 24, 2011 | 01:41 AM
  #12  
bound4VIP's Avatar
Registered User
iTrader: (3)
Joined: Jan 2010
Posts: 501
Likes: 13
From: Little Elm, Tx
if you can feel on both sides of the starter you will feel the bolts. the bolt heads will be on the other side of the bell of the transmission.
 
Reply
Old Feb 26, 2011 | 11:03 PM
  #13  
bklab's Avatar
Registered User
Joined: Feb 2011
Posts: 5
Likes: 0
How about where it says "starter motor mounting bolt" which is NOT what you have circled in red. I think that's what you're looking for. Good luck.
 
Reply
Old Feb 26, 2011 | 11:20 PM
  #14  
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member

After looking at this pic i'm very pissed off I paid someone 300 dollars to replace mine
 
Reply
Old Feb 26, 2011 | 11:40 PM
  #15  
bound4VIP's Avatar
Registered User
iTrader: (3)
Joined: Jan 2010
Posts: 501
Likes: 13
From: Little Elm, Tx
Originally Posted by JaE35
After looking at this pic i'm very pissed off I paid someone 300 dollars to replace mine
did you have someone on here do it or a shop?
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:25 PM.