Thanks to alot of people that have helped get this thing in full swing quick. Assaultech.com , Chasebays.com, DGR Suspension, Spec Clutches, Sikky.com, Dustin@Strafe, FTP Performance, Computechracing.com, tick-performance.com, if i forgot anyone else ill add them later.


Strafe Trunk
this is the way the car sat before the teardown
http://importalabama.com/articles/ca...g35-sedan.html
Motor
Assaultech.com,FTP Performance, Sikky.com
LQ9
Custom cam
Supporting valve train for cam
Fast 102MM intake manifold and throttle body
Sikky 7/8 headers with 3.5 inch collectors
Sikky Swap kit G35/350Z

Trans
Tick-performance.com

Bronze 1-4 Fork Pads
OEM 5-6 & Reverse Fork Pads
Billet 3-4 Synchronizer Keys (with upgraded springs)
New OEM 1-2, 5-6 & Reverse Keys & Springs
Carbon Fiber Synchronizer (blocker) Rings
Steel 3-4 Shift Fork
New 1-2 Synchronizer Assembly
New 3-4 Synchronizer Assembly
New Front Seal
New Rear Seal
Viper Style 2nd Gear
Spec 3+ clutch, Flywheel, and Throwout Bearing

Wiring/Fuel
Chasebaysonline.com, CJ-Motorsports

Chasebays Mil Spec LSX Harness
Chasebays Custom fuel return
CJ-Motorsports Fuel Correction kit
255 lph fuel pump
Chasebays LSX power steering kit
Computech.com Datamaxx logger LCD dash with all sensors needed



SIKKY Swap kit


SIKKY SWAP KIT





LQ9 from LKQ


wire tuck


More wire tuck


Getting Ready for datamaxx logger LCD dash


Tear down of stock cluster


Volk SF Challanges i picked up from Cliff aka DZ n.u.t.z


Chasebays MIL Spec LSX harness





*UPDATED PICS 3/31/11*

Sikky 7/8 headers with 3.5 inch collectors


3.5 inch collector on the Sikky 7/8 headers


ARP head studs and 255lph


DGR coilovers thanks Russ!!!! and Assaultech.com


32 way adjustable DGR coilovers


More pics of the DGR coilovers






New wheels


FAST 102mm from www.Chasebays.com


04 Z OH6 MAF



Buddyclub Low down rails From www.Chasebays.com to pair with a status racing seat











IMG]http://i749.photobucket.com/albums/xx132/logandbrewer/image.jpg[/IMG]
T 50 SEX Stage 2 built from www.tick-performance.com


RAWWRRR!!!!!!! Motors in!!!






Chase bays LSX power steering kit and reservoir www.chasebays.com

First start up VID untuned


More untuned footage


First magnaflow exhaust






New Exhaust videos for you to enjoy ill have some more this after noon in the light. This is still a 3.5 inch exhaust with a Vibrant resonator, and Spin Tech 6000 Pro Street Series muffler. ENJOY!!

Here are some updated shitty iphone 4s pics i took of how the car sits and some of my fav new additions that i love.












Old shifter



New shifter



If you look at the old shifter they have added some brash washers. As Quamen mentioned earlier they had some major play and I'm hoping this will solve that problem.



They have also added brass washers here as well to make up for the play. I hope to get this and my new Mil-Spec harness thrown on tonight and will keep those with the sikky kit updated.




My old harness loomed in the Nylon braided loom- Does not come with a Cannon plug disconnect - What we call a CM1 harness. Goes directly from the motor to the ECU like stock

The Mil-spec harness comes loomed in the Raychem DR25 high heat and diesel fuel resistant heat shrink and individual sensor labeling. It will also come with the Mil-Spec cannon plug quick disconnect

The original harness was only used for mock up and testing. No sense in using the expensive loom ad cannon plug for mocking up and testing



here is a picture of the individual sensor labeling



here is a quick picture i snapped with the iphone while we were taking better pictures with the sweet nikon d5100


This was open header ^^^^^


Spec 3+ with Aluminum Flywheel, and Spec throwout bearing, off with the spec stock stuff and on with the Sikky quick bleeder and line adapter.
Sorry for the crappy Iphone 4 pics I hope chase from Chasebays or Danny from assaultech will bring one of their nice camera so we can get some better pics for you guys.


I will have more pics up daily alot of parts are still coming in.
Coilovers, Sikky headers, Intake manifold and throttle body come tomorrow when chase from Chasebays comes to measure out some things for fuel and AC lines. Trans is expected to be in on the 8th and Motor is at FTP Performance getting all the goods installed.

If you have any questions let me know

Thanks,
Logan

 

whoa, gonna be siiick

 

Thats the plan

 

Wow, is this really happening?? Gonna be NUTS!

 

in for teh win

 

hahaha @ Marcus yea i told everyone i was doing this finally got the ***** together and started getting everything together

 

it's only cause he knew we would razz him until he did it. lol

 

^^^^ this is true have to walk the talk

 

This has the potential to be one of the most epic Sedan build threads in recent history. Can't wait to see this come together!

 

i was trying to make to to Import Alliance in Atlanta but they are shipping my trans out on the 6-8th EEEEEEk but they are just in NC so im hoping it wont take long to get but we all know how parts shipping can be so at the most 3 weeks

 

I'm paying attention.

 

This is gonna be pure WIN!!!!

In for more winning updates to come!

 

I like it.

 

No worries ill have more pictures up and all sorts of videos to come. It will have giggle gas on it for the time being till our local welder Walker Morgan of www.MPfab.com recovers from a small motorcycle wreck then when i have 6 spare weeks it will have a similar setup to Snyper off of my350z with a pt88 or something a tad bit smaller.

 

I smell awesomeness brewing!