I have checked all the connectors and all seam to be fine... is there a fuse I should check?

 

silly question, did you make sure the switch is ON...

 

there is a switch??? where

 

If its a manual the hand brake has to be engaged.

 

its auto,,,, but there is the switch?

 

The switch that's right next to the buttons. I think it says either "auto" or "off". Make sure it is set to auto when you want it to work. And are either of the two buttons set to a position? It might have to be set before it will move the seat to that position.

 

oh,,,, now i feel stupid

 

Did that fix the problem?

 

well , it moves back to the possition it was before,, and sttering wheel moves up so i can get out easily or something BUT if i press M, 1 or 2 buttons nothing happens,,,,, I'm not sure how it works,,,, will read the manual tonight

 

^ sounds like it fixed his problem.

You didn't store the settings for M1 or M2 yet. Hence why it will just give you the exit and enterance settings of your last settings.

I forgot how to set it up. Its like you set your seat, hold the store/program/set button and then hold #1 or 2 and it will store.


least you know its not broken =D