05 G35 Sedan, 05 350z suspension?? - Page 2 - G35Driver - Infiniti G35 & G37 Forum Discussion

Jun 17, 2011 | 04:51 PM

#16

EDW1NK

Registered User

iTrader: (2)

Joined: May 2010

Posts: 151

Likes: 8

From: 626

Quote:

Originally Posted by NFSP G35

Then your alignment shop must suck.

Here's my front tire after over a year and 10,000 miles:

did you get an alignment with the 350z specs or the g35?

Jun 17, 2011 | 04:55 PM

#17

NFSP G35

? = 2B || !2B

iTrader: (22)

Joined: Apr 2009

Posts: 22,160

Likes: 852

From: Tallahassee, FL (or thereabout)

^G35, though they couldn't get the front camber into spec. They just got it as close to possible.

Jun 17, 2011 | 04:58 PM

#18

thescreensavers

Mr.202?

iTrader: (10)

Joined: Apr 2009

Posts: 9,751

Likes: 206

From: WPB

^ I am with him

My Tires are fine, they got everything into spec but Camber, which is obvious since its lowered.

Jun 17, 2011 | 05:00 PM

#19

socialconflicts

Registered User

iTrader: (24)

Joined: Dec 2009

Posts: 3,477

Likes: 62

From: San Diego

dang thats a lot... i got my complete z suspension with 11k miles on it for 120 bucks.. it was from an 07 Z if im correct. i bought it from the same guy that sold me Z brembos for like 650

Jun 17, 2011 | 05:07 PM

#20

brandon1978

Registered User

iTrader: (3)

Joined: Jul 2005

Posts: 382

Likes: 13

From: Austin, TX

Looks like minimal wear. Exactly what toe setting was it aligned to? Are you still using OEM compression rods?

Quote:

Originally Posted by NFSP G35

Then your alignment shop must suck. Here's my front tire after over a year and 10,000 miles:

Jun 17, 2011 | 05:14 PM

#21

NFSP G35

? = 2B || !2B

iTrader: (22)

Joined: Apr 2009

Posts: 22,160

Likes: 852

From: Tallahassee, FL (or thereabout)

Quote:

Originally Posted by brandon1978

Looks like minimal wear. Exactly what toe setting was it aligned to? Are you still using OEM compression rods?

IDK on the toe. I just told them I wanted it aligned, warned them it was lowered and the camber might not go into spec but to get it as close as possible... and the alignment is a lot older than the tires (Aligned 9/8/09)
Yes, I'm still on oem compression rods.