G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Transmission Service Question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 9, 2013 | 12:32 PM
  #1  
06gtfanatic's Avatar
Thread Starter
|
Registered User
Joined: Sep 2011
Posts: 8
Likes: 0
Transmission Service Question

Hello all,

I have a 2005 G35 Sedan. Got it back in 06 with 69K on it. By mid summer 2010 car was at 130K. Since then, we put almost 50K on it. Most these miles are highway miles. Car runs fine. If you gun it, about 5-6k rev seems to pause for a mini sec. I can't remember if that's normal or not.

First, I need everyone to drop all your stones before I say this. We never did a automatic transmission service since we got the car. My mechanic test drove it and says she runs very well. Says the shifting is fine to him. He believes the service won't affect the car. All transmission shops I have spoken to say the opposite. Maybe on a fine line, they don't wanna be liable if something does happen after a service.

So, my question is, "What would you do"?
 
Reply
Old Mar 9, 2013 | 12:45 PM
  #2  
redonblack35's Avatar
Registered User
iTrader: (3)
Joined: Oct 2012
Posts: 665
Likes: 47
From: Phoenix
Service, preventative maintenance. In your mechanics eyes he sees no problems to be fixed, in my eyes I see the possibility of avoiding a problem.
 
Reply
Old Mar 9, 2013 | 12:49 PM
  #3  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
We've heard issue with members doing a "Flush" after so many miles without service. I'd do a drain/fill and see what kind of reaction you get. If it feels better do a drain/fill along with your oil changes for the next several months. This won't put your trans in shock and it should shift close to new. Only use the Nissan recommended trans fluid!
Gary
 
Reply
Old Mar 9, 2013 | 12:52 PM
  #4  
06gtfanatic's Avatar
Thread Starter
|
Registered User
Joined: Sep 2011
Posts: 8
Likes: 0
Is the drain and fill where you drop the pan and replace the pan gasket? Not the bypass machine at oil changing shops right? Thanks
 
Reply
Old Mar 9, 2013 | 02:05 PM
  #5  
bigjee's Avatar
Registered User
iTrader: (2)
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
You can remove the pan and replace the gasket if you want but I wouldnt mess around with the gasket etc if it doenst need to be replaced.
Follow this is the drain and fill procedure as its the safest one:

http://infinitihelp.com/diy/gsedan/p...on_service.php
 
Reply
Old Mar 9, 2013 | 02:08 PM
  #6  
thescreensavers's Avatar
Mr.202?
iTrader: (10)
Joined: Apr 2009
Posts: 9,751
Likes: 206
From: WPB
Premier Member

^ Gasket should be changed anytime you remove it but people choose not to. Its very easy to replace so I am not sure why you would say " I wouldn't mess around with the gasket " you scrape off the old one and put the new one on. Its better to replace it than to have a leak imo.
 
Reply
Old Mar 9, 2013 | 02:15 PM
  #7  
bigjee's Avatar
Registered User
iTrader: (2)
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
Originally Posted by thescreensavers
^ Gasket should be changed anytime you remove it but people choose not to. Its very easy to replace so I am not sure why you would say " I wouldn't mess around with the gasket " you scrape off the old one and put the new one on. Its better to replace it than to have a leak imo.
With the method above there is no removal of the oil pan.
If he is removing the pan then I would change the gasket, obviously.
I'm not saying it should never be removed.
And most people choose not to change the gaskets because they dont leak that often and its not needed whereas the AT fluid service is required item.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tiguy99
G35 Cars
15
Mar 1, 2016 11:42 AM
derres
G35 Cars
3
Aug 28, 2015 03:27 PM
saskicker32
Engine, Drivetrain & Forced-Induction
0
Aug 11, 2015 02:12 PM
wuppiedog
G35 Cars
1
Aug 7, 2015 11:16 AM
G35Sask
Intake & Exhaust
16
Aug 5, 2015 10:17 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:31 PM.