Alright so this was my first time changing my spark plugs or ever really working on a car. So I started on the driver side an did one at a time no way I switch up any wires to the coils. I installed the new ones and the car started but maybe a min or 2 it died so I tried to crank it again an it just cranks over an over....I checked all connection everything looked fine so I changed back to my old plugs and the car started once again.. I shut it off took the spark plugs back to autozone and got my money back ordered oem ones. Got back home started the car again and it started back up stays started for about 2 mins then died again an now just cranks...

 

Sounds like you ran out of gas, don't rely on the gas gauge which is notorious for failing and showing a half tank when you're actually empty. Add one gallon of fresh fuel and see if it runs.

 

If that's not it then plug in an OBD2 scanner and check for hidden codes, might be a cam/crank sensor failing.

 

Check all your ground points + the sub harness connectors to the coil packs.