I've tried searching but all the pics that come up are dead.

If you have Tein H-Techs on your sedan....could you please post pics?

Thanks

 

yeah....please post up some pics...i am looking for some pics as well. All the pics seem to be corrupted or something

 

 

i got the stech looks way nicer ill post some pics up soon

 

I think the H Techs give a nice drop if you want to retain some ride quality. Looks good jasperG35. If I ever get around to dropping my X, I am going for H Techs or OEM 350Z springs. I definitely don't want to ruin the ride quality. If Tokico got off their butts and came out with a D Spec for the X, it would make me decide ALOT faster.

 

These are 350Z H-Techs with 3/8" spacers in the rear.........

 

what did you use as a spacer?

 

See Part# 9.6101 on this page...........

http://www.energysuspension.com/pages/sboots.html

These were recommended by a couple of our seasoned suspension veterans. FYI, they're not entirely "plug and play"....they require a bit of simple trimming with a razor blade. PM me if you want any more details.

-T

 

JasperG,
Your lawn needs mowing again!

 

Love my H-Techs

 

i know... it's kind of hard to do while i'm in kuwait... those are the same old pics.

 

Those of you with the H Techs or OEM Z springs, were you able to realign the car to spec? I'd hate to tear tires up.

 

for the most part. i was able to get everything except camber in front... i got it to about 1.0 where the specs are to 0.8.

 

So the rear was able to brought into spec? from .8 to 1.0 up front isn't too terrible. I just hate putting springs on OEM struts. I have an 05 X so D Specs are not available yet.

 

i'm with you on that... my ride was a lot more stable than buddy's non-sport suspension.
yes, the rear was pretty easy. but it only drops 0.7 in the rear, so adjustability is still there. ran out of room up front.