G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

instruction for installing clear corners

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 29, 2006 | 06:53 PM
  #1  
basus's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 333
Likes: 0
instruction for installing clear corners

can someone please send me as the part i bought from everything g35 came with japanese instructions
 
Reply
Old Mar 29, 2006 | 06:56 PM
  #2  
Texasscout's Avatar
Registered User
iTrader: (11)
Joined: Feb 2005
Posts: 35,605
Likes: 2,116
From: South Texas
It's as easy as pie....

Grab them by the edge closest to the fender opening and pull gently untill they pop out. disconnect the harness. If you want clear bulbs, remove the originals and put in the clears, other wise, connect the harness to the clears and shove them back in place. That's why so many have had theirs stolen.
 
Reply
Old Mar 29, 2006 | 07:15 PM
  #3  
basus's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 333
Likes: 0
Originally Posted by Texasscout
It's as easy as pie....

Grab them by the edge closest to the fender opening and pull gently untill they pop out. disconnect the harness. If you want clear bulbs, remove the originals and put in the clears, other wise, connect the harness to the clears and shove them back in place. That's why so many have had theirs stolen.
Thanks man
 
Reply
Old Mar 29, 2006 | 07:17 PM
  #4  
0MGHI2U's Avatar
Registered User
iTrader: (8)
Joined: Dec 2005
Posts: 964
Likes: 9
From: Doyelstown, PA
man u dont need instructions.. a kid can do it.. just put it out and twist the bulb harness and put it back in the new one and thats it
 
Reply
Old Mar 29, 2006 | 10:31 PM
  #5  
basus's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 333
Likes: 0
Originally Posted by Texasscout
It's as easy as pie....

Grab them by the edge closest to the fender opening and pull gently untill they pop out. disconnect the harness. If you want clear bulbs, remove the originals and put in the clears, other wise, connect the harness to the clears and shove them back in place. That's why so many have had theirs stolen.
Sitting facing the bumper Shall i pull them towards me or horizontally -- tried did not come out
 
Reply
Old Mar 29, 2006 | 11:48 PM
  #6  
VQ Hotness's Avatar
Registered User
iTrader: (5)
Joined: Oct 2005
Posts: 1,578
Likes: 1
From: Wellington Florida
just pull it i think away from the car or maybe u slide it toward the wheel one of the two i forget
 
Reply
Old Mar 30, 2006 | 12:24 AM
  #7  
speedracerg35's Avatar
Registered User
iTrader: (8)
Joined: Feb 2006
Posts: 2,949
Likes: 39
From: baltimore
good lord, just yank it.
 
Reply
Old Mar 30, 2006 | 12:25 AM
  #8  
speedracerg35's Avatar
Registered User
iTrader: (8)
Joined: Feb 2006
Posts: 2,949
Likes: 39
From: baltimore
it pops right off!!!
 
Reply
Old Mar 30, 2006 | 01:41 AM
  #9  
ekimrekrab's Avatar
Registered User
Joined: Sep 2005
Posts: 22
Likes: 0
From: Dublin, Ca.
I got my clear corners for Christmas (2004!!) I forgot I had them. Just put them both on in less than 2 minutes. Just do it. I'm sure you've yanked on things before.
 
Reply
Old Mar 30, 2006 | 06:28 AM
  #10  
jimmykce1's Avatar
Registered User
iTrader: (3)
Joined: Sep 2005
Posts: 1,337
Likes: 1
From: Yorktown, VA
JUst follow the pictures. Get a screwdriver and push in on the metal clip and pull the corners away from the fender.
 
Reply
Old Apr 9, 2006 | 02:24 PM
  #11  
basus's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 333
Likes: 0
I installed it and it was pretty easy. Saw that the factory ones came with white bulb and the JDM clear ones came with orange bulb, i just used the factory white bulbs

What did others do
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
May 31, 2020 01:56 PM
EnCr1pt3d
Audio, Video & Electronics
5
Jul 8, 2019 02:48 PM
mbe093
Lights
4
Oct 2, 2016 11:09 PM
RA081024
New Members Check In
1
Aug 18, 2015 07:03 AM
underworld
New Members Check In
4
Aug 6, 2015 01:36 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:45 PM.