View Poll Results: Do you use the lift wheel and slide seat back functions?
No



12
19.67%
Yes



35
57.38%
Lift wheel only



11
18.03%
Slide seat only



3
4.92%
Voters: 61. You may not vote on this poll
Lift wheel and slide seat back
Lift wheel and slide seat back
Just wondering how many people use the lift steering wheel and slide seat back on exit option? I found it interesting that those are disabled by default, and that their selection also affects the synchronization of wheel and mirrors when you move the seat.
I recently enabled mine. Not sure I really like it. I don't like having to wait for the seat to move once I open the door. Also, I don't like how the seat goes down so low. I'd prefer it to just move back, and not also lower. Also makes it hard for people to get in the back seat, since the drivers seat doesn't move forward until you hit the start button. Also, not sure I really want the extra wear and tear on the motors to have the seat always moving. So, I think I may turn these back off, (although I do like the mirror/wheel synchronization, as I often adjust my seat to different positions on long drives).
So... who uses these features, and what do you like/dislike about them?
I recently enabled mine. Not sure I really like it. I don't like having to wait for the seat to move once I open the door. Also, I don't like how the seat goes down so low. I'd prefer it to just move back, and not also lower. Also makes it hard for people to get in the back seat, since the drivers seat doesn't move forward until you hit the start button. Also, not sure I really want the extra wear and tear on the motors to have the seat always moving. So, I think I may turn these back off, (although I do like the mirror/wheel synchronization, as I often adjust my seat to different positions on long drives).
So... who uses these features, and what do you like/dislike about them?
Originally Posted by mikepro
Also, not sure I really want the extra wear and tear on the motors to have the seat always moving.
Joined: Nov 2003
Posts: 30,233
Likes: 175
From: Rothesay, New Brunswick, Canada
Originally Posted by kraqcommando
where do you set it?
The entry/exit function can be activated
or canceled by pressing and holding the
SET switch for more than 10 seconds
while the ignition switch is in the LOCK
position.
The indicator light will blink once when
the function is canceled, and the indicator
light will blink twice when the function is
activated.
The entry/exit function can also be activated
or canceled from the setting display.
See ªVehicle information and settings
º in the ª4. Monitor, climate, audio,
phone and voice recognition systemsº
section.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
brian_z
New Members Check In
0
Jul 20, 2015 01:30 AM



