im gonna go pick it up, gonna use it for some interior stuff, dont think ill be able to use it on my intake, but we'll see!

 

niceeeeeeeeee

 

Since you stick it on can it withstand the heat in the engine bay?

 

If I end up using it in the bay I will use epoxy to put it on!

 

It wont work for the engine bay guys, it's a vinyl material, with the heat after a while it might start to look bad. I searched for about 2 solid months trying to find the right material for the interior before I came across the one I used, there are several different styles of this material I ran through before I picked the right one. The weaves were all different, but the one I went with matched my hood, wing, A pillars and B pillars. Like I said I paid $45 a yard for the material I used, but I wasted close to $300 on just samples that looked like crap.

 

Hey guys I got some questions. How much does it usually cost to have the interior wrapped? Because I don't think I will be able to do this myself. Thanks.

 

Rick, where did you end up getting the material?

 

My interior shop was able to track it down for me, they did a hell of a job installing and wrapping everything up for me. They did my whole interior in less then 1 week, but it took us almost 3 months to get the right material we needed.

 

Hey Rick.... Where did you get your interior done? Also, how much did they charge for just the carbonf fiber trim wrapping?

Thanks again for the help with the parts yesterday. Let me know if that Carbon Fiber Engine Cover makes it in today.

 

No problem man! Thank you for coming in! I'll let you know ASAP on the cover and strut bar. My shop that did it for me is right down the street from the dealership here, the shop is called Barajas Upholstery, they do work for all the dealerships here and they do a bunch of custom cars that get sent to them all over the country. They've worked on all my cars for the past 10 years now.

It all depends on what you want done really. Let me know and I can hook you up with them.

 

so anyone get a hold of this stuff?

 

^i ordered 2 yards yesterday

 

^ Where did you get yours from, Shane? Let us know how it turns out and post some pics when you get a chance.

You can buy it here:

http://www.uscomposites.com/carbonpage.html

It ranges from $40 - $50 per yard for a 50" wide piece. You can get it in quite a few different weaves.

 

http://www.e90post.com/forums/showthread.php?t=185836

 

Thanks for the info, Rick. What do you think this place would charge to have my seats quilted in Alcantara or Suede like in this pic? I don't need an estimate right now... was just curious if you might have a ballpark figure, since you've had a ton of interior work done. You can send me a PM, Rick, as I don't want to highjack this thread more than I already have.