I am getting LED turn signals up front with load resistors for hyper blink fix here shortly. I am not the first and probably not the last. Should be pretty simple, but if it helps anyone out I'll put pics/vids together.

Anyone interested in a DIY? I didn't see one in our section. If so I will put one together......

If not, it'll go much quicker

 

You have got my vote for a DIY. This is a mod I will prob end up with so a DIY would be a huge help for me

 

We can never have too many good DIY's.

 

Yea, i was just thinking about doin that soon. Do us a DIY with lots of pics...

 

I was thinking about changing my turn signals to LED, but was hesistant because of the hyper blink problem. A DIY with the hyper blink fix would definately hit the spot. Yes, pics and vids please.

 

kewl, I'll do it... hopefully by Sunday I will have it up. Thanks guys,......

 

^+10000 do it!!

 

absolutely!

 

i did this on my g35 coupe and it was a PITA to actually access the blinkers via the fender liner with the car jacked up.. otherwise it's a really easy thing to do, but actually getting to the blinkers is hard on the coupes, idk about the sedans?

 

it's not bad (i've changed the fogs, so the signals would be easier). you just need to take out the intakes

 

^ oh lucky haha there's like no wiggle room near the blinkers on our coupes good luck!

 

Would def appreciate a DIY...I was thinking about doing this soon.

 

I snooped around the engine bay last night to figure out the layout and what I needed from the hardware store. To access the sedan blinkers just takes removing the airboxes. Took about 5 minutes per side (if that). I guess sedan guys are lucky.

 

DIY is posted here:

https://g35driver.com/forums/v36-diy...ml#post4496170

 

^great write up man, always nice to see people put some effort in to help others out.