Anyone know a good shop that Flares fenders around the 818 (woodland hills).
I got my 370z Rims and i need the fenders flared

 

You need to flare your fenders to fit z rims? What are the widths and offsets?

ShanesG can do a mild flare for you.

 

I dont think you need to get fender flares for rims that have a +30 offset in the rear all you need is some negative camber

 

but I wouldnt mind seeing another sedan with flared fenders

 

lol.. ya the offset is +30 and the width is 10... im only worried about the back... the front is fine. about how much neg chamber would i need?

 

as much as this guy

 

^ eww

 

I'm running 20x10.5 +30 in the rear and my camber is set to -2 degrees. You'll be fine and won't need flares. What are you dropped on?

 

Im getting dropped on tanabes

 

But our on 10.5, he will be a bit more aggressive.


You would be in -2.0 -2.5 area bro.
Get some 265s in the rear, camber, tuck, and your set

 

Which ones?

They have like 3 springs for our cars lol

 

My rims are 10 in the back so wouldnt i need less chamber?

and im getting the springs with the moderate drop (NF210)

 

Ya but your +30 with a 10 rim, thats more aggressive than a +30 on 10.5 wheel.
More aggressive means more camber.

As for the drop, if you go with aggressive wheels, you need aggressive drop. If not, your wheels are going to be poking out.

 

I would love an aggressive drop but i have a crazy drive way and i cant park outside.... Gated area regulation

i think im gonna need my fenders flared at the end lol, I have seen a guy that has the same rims with the same drop and he got them to tuck under the fenders, but he was all wheel drive and i have heard that springs on an X bring it lower to the ground than the same springs on a rear wheel drive G

 

ya, they drop a bit more aggressive than we do with the same springs.

Well i live in the 818 but just about any shop can do it.
Auto Explosion can do it but its like 5 grand.