G35 Sedan V36 2007- 08 Discussion about the 2nd Generation G35 Sedan 2007 - 08

FX wheels/snow tires too big?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Dec 13, 2013 | 11:26 PM
  #1  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
FX wheels/snow tires too big?

Having a hard time figuring this out as I don't have a lot of experience with this. Found a deal on craigslist for $450 from an fx35 18" wheels with 265/60r18 snow tires. Will these work on my 2008 g35 journey?

http://desmoines.craigslist.org/pts/4242586040.html
 
Reply
Old Dec 16, 2013 | 11:38 AM
  #2  
Guitarguy's Avatar
Registered User
Joined: May 2010
Posts: 71
Likes: 9
From: Cleveland, OH
Try using this as reference: https://www.1010tires.com/Tools/Tire-Size-Calculator

Short answer= wheels probably, tires too big!
 
Reply
Old Dec 16, 2013 | 07:51 PM
  #3  
Wannabe6MT's Avatar
-MN G Crew-
Staff Alumni
iTrader: (10)
Joined: May 2007
Posts: 21,010
Likes: 205
From: Fargo ND/Eden Prairie MN
Premier Member

17" wheels are better on the G in the winter.
 
Reply
Old Dec 16, 2013 | 09:05 PM
  #4  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
thanks

ok - this is helpful. There are a couple other deals on craigslist right now too, so I'll check them out. Thanks for the help all.
 
Reply
Old Dec 18, 2013 | 02:17 PM
  #5  
Mustang5L5's Avatar
Registered User
iTrader: (1)
Joined: Jul 2005
Posts: 8,818
Likes: 468
From: Taxachusetts
If you are looking for a pure snow tire, you want the smallest rims (to give largest sidewall) and narrow tires (to cut through snow) as you can fit.

So for your car, 17" wheels are what you want to look at. Tire size will vary on rim width, but you probably want something in the 205-215 range. You also want to keep your overall diameter as close to stock as you possibly can.
 
Reply
Old Dec 18, 2013 | 08:49 PM
  #6  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
Originally Posted by Mustang5L5
If you are looking for a pure snow tire, you want the smallest rims (to give largest sidewall) and narrow tires (to cut through snow) as you can fit.

So for your car, 17" wheels are what you want to look at. Tire size will vary on rim width, but you probably want something in the 205-215 range. You also want to keep your overall diameter as close to stock as you possibly can.
How about these? I've never bought different wheels for any of my cars, so new for me.

http://fortdodge.craigslist.org/pts/4242175621.html
 
Reply
Old Dec 19, 2013 | 01:36 AM
  #7  
Wannabe6MT's Avatar
-MN G Crew-
Staff Alumni
iTrader: (10)
Joined: May 2007
Posts: 21,010
Likes: 205
From: Fargo ND/Eden Prairie MN
Premier Member

Ideal size on a G with a 17" rim is 215/55/17. That is same diamter as OEM. With a 225/45/17 you will be off by a good margin IE at 60mph your car will really be going 57. And it will only get worse as you go faster.

Have you thought about just buying a set of 17" rims (easy enough) and getting some cheaper winter tires brand new? I bought General Altimax Arctic (fantastic winter tire. It really is awesome in the snow. Lot of history behind this tire that dates back to sweden, but i won't bore you with my tire nerdness facts.) winter tires 215/55/17 from discounttiredirect for 425 shipped. Had a set of 17" wheels I bought off craigslist and mounted them to my car. This is probably your smartest route. Even if you can find 17s with tires on them, just have them removed and the new winters put on. Otherwise, buy a set of 16" steel wheels and roll like a badass in the winter with even cheaper tires.
 
Reply
Old Dec 19, 2013 | 08:13 AM
  #8  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
Originally Posted by Wannabe6MT
Ideal size on a G with a 17" rim is 215/55/17. That is same diameter as OEM. With a 225/45/17 you will be off by a good margin IE at 60mph your car will really be going 57. And it will only get worse as you go faster.
So this ^ I didn't know and I feel even more noob.
 
Reply
Old Dec 19, 2013 | 02:23 PM
  #9  
Mustang5L5's Avatar
Registered User
iTrader: (1)
Joined: Jul 2005
Posts: 8,818
Likes: 468
From: Taxachusetts
What year is your car? Early models with the smaller brakes can fit 16's.

16x7's with some 205/65/16's would be cheap if you can find rims that would fit. G35 16" wheels are rare.

Your overall tire diameter would increas 0.1". Not really that significant.
 
Reply
Old Dec 19, 2013 | 03:33 PM
  #10  
jkuo's Avatar
Registered User
Joined: May 2008
Posts: 393
Likes: 12
From: Atlanta, GA
The FX OEM rolling diameter is a little over 30". OEM G diameter is a little over 26". So that 265/60/18 is much taller than your normal tire. It would probably rub in the wheel well since it's almost 2" taller on each side. And your speedo would be off like 15%
 
Reply
Old Dec 24, 2013 | 12:34 PM
  #11  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
Originally Posted by IowaCoug
How about these? I've never bought different wheels for any of my cars, so new for me.

http://fortdodge.craigslist.org/pts/4242175621.html
So I bought these wheels and tires thinking I'll just deal with the speed issue as the radius is smaller. and the wheels don't fit around the hub! Is that normal? Is there an adapter to use? The bolt pattern fits but the g hub is too big.
 
Reply
Old Dec 24, 2013 | 01:12 PM
  #12  
dominate's Avatar
Registered User
iTrader: (1)
Joined: Jan 2012
Posts: 929
Likes: 89
From: O'ahu, Hawai'i
You need hub rings, these should work http://www.ebay.com/itm/66-1-56-1-Me...-/190643991620
 
Reply
Old Dec 24, 2013 | 04:31 PM
  #13  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
Originally Posted by dominate
You need hub rings, these should work http://www.ebay.com/itm/66-1-56-1-Me...-/190643991620
Thanks. It looks like these rings are for the opposite of my problem? Seems they use these when your vehicles hub is smaller than the centerbore on the wheel. Can I use these to adapt my larger hub to a smaller centerbore on the wheel?
 
Reply
Old Dec 24, 2013 | 05:11 PM
  #14  
vqsmile's Avatar
Registered User
iTrader: (1)
Joined: Oct 2010
Posts: 3,945
Likes: 427
From: SF bayarea (925)
Originally Posted by IowaCoug
Thanks. It looks like these rings are for the opposite of my problem? Seems they use these when your vehicles hub is smaller than the centerbore on the wheel. Can I use these to adapt my larger hub to a smaller centerbore on the wheel?
If your hub is larger than the wheel centerbore you can probably get a modest wheel spacer made to adapt the smaller bore size. Also, are you absolutely sure the bore is what is causing the rims not to seat on the hub? I ask because Infiniti deliberately put a small bolt on the face of the hubs on the models with staggered wheels to prevent an unsuspecting owner from mixing up the front and rear. There is a relief in the back of the correct wheel for the hubs with the bolt. If you have those bolts (which are removable btw), then is it possible the new wheels are just hitting them? Just a thought
 
Reply
Old Dec 24, 2013 | 06:17 PM
  #15  
IowaCoug's Avatar
Thread Starter
|
Registered User
Joined: Dec 2013
Posts: 20
Likes: 0
From: Iowa
Yes, I was at the tire shop and they showed me. I don't have staggered setup on my 08 journey sedan
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 04:42 PM.