G35 Sedan V36 2007- 08 Discussion about the 2nd Generation G35 Sedan 2007 - 08

Head Scratcher....P2000 and P2003

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old May 6, 2017 | 06:38 PM
  #1  
PeteG35s's Avatar
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 4
Likes: 0
Head Scratcher....P2000 and P2003

Hi Everyone who is still here. I have a 2007 VQ35HR with 130,000 miles on her. I have been running great for the last 10 7 years, but recently had the check engine light shine it's ugly face at me.

When I check the codes with my reader I get a P2000 - which is a diesel code, and another P2003.

Now, it is possible that my code reader is not able to show the letter A on the codes? Meaning the codes are actually P2A00 and P2A03.. Which relate to O2 sensors, or an intake leak.. much more likely than a diesel problem on this car

It't an old reader, likely from the 1990's.

If anyone has heard of this, please let me know.
 
Reply
Old May 7, 2017 | 12:50 AM
  #2  
coffeysm's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 1,382
Likes: 171
From: West Chester, PA
Those are for both A/F sensors (upstream O2 sensors). I find it hard to believe they both are bad.

Intake leaks and fuel pressure/delivery seem to be the main issue mention in alldata.

You could have a bad MAF sensor also.

Any work done recently?

I'd buy an actual scan tool or something you that will work with like the Torque App.

That way you can get live data and monitor the fuel trims and stuff like that.
 
Reply
Old May 7, 2017 | 04:34 PM
  #3  
PeteG35s's Avatar
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 4
Likes: 0
Originally Posted by coffeysm
Those are for both A/F sensors (upstream O2 sensors). I find it hard to believe they both are bad.

Intake leaks and fuel pressure/delivery seem to be the main issue mention in alldata.

You could have a bad MAF sensor also.

Any work done recently?

I'd buy an actual scan tool or something you that will work with like the Torque App.

That way you can get live data and monitor the fuel trims and stuff like that.
I agree, IF it's the P2A00 and P2A03 codes. My question was around the fact that I got P2000 and P2003 codes.

Now, I have also had some intermitent problems with the fuel level sensor (P0462) but that code has stopped showing up. Maybe time for a new fuel pump.

The big question is: "Do old code readers not recognize Alpha characters?" is it possible that my code reader showing a P2000 is really a P2A00??
 
Reply
Old May 7, 2017 | 07:07 PM
  #4  
coffeysm's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 1,382
Likes: 171
From: West Chester, PA
Not sure I have never seen that code before. I'd take it into AutoZone or something and have them scan it for free and see if you get the same result.
 
Reply
Old May 8, 2017 | 07:09 AM
  #5  
ScraggleRock's Avatar
Registered User
iTrader: (4)
Joined: Dec 2013
Posts: 6,811
Likes: 738
Originally Posted by coffeysm
Not sure I have never seen that code before. I'd take it into AutoZone or something and have them scan it for free and see if you get the same result.
They can't do that anymore in CA cuz repair places complained about losing money. Lol
 
Reply
Old May 8, 2017 | 09:05 AM
  #6  
bluedevils95's Avatar
Registered User
iTrader: (6)
Joined: Dec 2008
Posts: 19,624
Likes: 577
From: Torrance, CA
^ you beat me to it. They do want there $140 to read a stupid light. Which is one reason i bought one that cost me a couple hundred
 
Reply
Old May 8, 2017 | 11:13 AM
  #7  
coffeysm's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 1,382
Likes: 171
From: West Chester, PA
Well, that sucks. I'd get a new scanner anyway and replace that one from the 1990's. I bought an Autel Diaglink for about 115 bucks. Then you can get vehicle specific add-on modules for 15 dollars a piece.
 
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 07:33 PM.