Please Help me out?!
#1
Please Help me out?!
Can someone help me please? I have had oil leaking into my Spark Plugs from both side, passenger side being excessive. I bought the OEM Valve cover gasket but they did not give me the O rings? What am i supposed to do? When i called them up they said you cant replace them anyway it is within the Valve Cover. Any help please?!
#2
#3
Join Date: May 2017
Location: Washington State
Posts: 14,790
Received 2,456 Likes
on
2,150 Posts
Coupe 6MT Premium RAS
It can be done but it requires you to drill out the retaining plastic on the valve covers so you can remove the old gaskets. Some folks have had success by just using Permatex Ultra Grey RTV on the existing spark plug well gasket and just reinstalling the valve covers with a new VC gasket (or more permatex). If you do make sure to thoroughly clean the surfaces of any oil and let the RTV cure for 24 hours before starting the engine (based on ambient temp, in cold weather wait 48 hours).
Or you can buy new valve covers.
Or you can buy new valve covers.
Thread
Thread Starter
Forum
Replies
Last Post
yosip1115
The G-Spot
6
08-20-2015 10:30 PM