General Tech Questions This Forum is Only for Questions and Posts that Do Not fit under the other Tech categories.(No Classified Posts)

code P0507?

Old Sep 1, 2011 | 11:11 AM
  #1  
jin22gt's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jan 2007
Posts: 620
Likes: 8
code P0507?

My CES light is on, code P0507 is the problem.
Autozone printed out the code defination of p0507,

Speed control system RPM higher than expected
Probable cause
1. Large vacuum leak
2. Faulty throttle control actuator
3. Throttle body damage

I was on vacation for a month and had my car sit in the driveway for a little bit. When I first started the car up it didnt turn on as normal, took couple of a seconds longer and was choking a little bit.

I didnt have any problems b4 my trip. What would cause this problem? I checked for vacuum leaks but all intake pipes seems good. Should I clean the K&N cone filter? OR should i clean the TB?? but have read it causes alot of problems if u try to clean it.

Also my SES, VDC slip, BRAKE light is on sometimes. Did some research, and its most likly a problem with the brakes/fluid. Filled up the resoiver with brake fluid. Let see if that fixes this problem.? Can this problem be related to the p0507?
 

Last edited by jin22gt; Sep 1, 2011 at 11:41 AM.
Reply
Old Sep 2, 2011 | 08:55 AM
  #2  
jin22gt's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jan 2007
Posts: 620
Likes: 8
anybody?

update:
SES, VDC slip, and brake lights are off, ever since i toped it off with brake fluid. but only got couple of miles on it. Lets see what happens.
 
Reply
Old Sep 22, 2011 | 12:40 PM
  #3  
likemystyleG35's Avatar
Registered User
Joined: Nov 2007
Posts: 48
Likes: 0
From: DIRTEE JERZEE
could just have to replace your throttle body completely...check this out first https://g35driver.com/forums/v36-diy...le-bodies.html
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
KallDay86
Engine, Drivetrain & Forced-Induction
1
Jan 8, 2016 12:42 AM
joel extreme
SOCAL Meetings & Events
0
Sep 29, 2015 04:44 AM
Detailed Image
Care & Detailing
0
Sep 28, 2015 07:04 AM
vamarris
Engine, Drivetrain & Forced-Induction
0
Sep 26, 2015 12:56 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 10:06 PM.