Group Buy: SxExCx Custom Grounding Kit

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 16, 2009 | 01:55 PM
  #511  
04ScoupeAT's Avatar
Registered User
iTrader: (1)
Joined: Jan 2009
Posts: 214
Likes: 0
From: MD
Originally Posted by SxExCx
trust me, the install is VERY straight forward. The only labor-intensive part is jacking up the car and crawling under. If you dont feel comfortable, you can just leave that wire off and not get the full results.
thats not too bad...as i spent about 2 hours under there jarring and trying to loosen the bolts of old exhaust...to no avail.....where under car is it going? safe to just jack stand the front or use all 4 ?.....and we can expect delivery around a week and a half upon shipment right?
 
Reply
Old Apr 16, 2009 | 01:55 PM
  #512  
DKatman's Avatar
Registered User
iTrader: (8)
Joined: Dec 2008
Posts: 364
Likes: 1
From: Culver City, CA
OK. I was hoping to make it later (or that Saturday) so I could hit up this class I go to. BUT...I understand that this is what needs to happen. I can take off from my house at about 9:30am then and be out to you between 10:30 and 11:00 without much problem.

Dave
 
Reply
Old Apr 16, 2009 | 01:56 PM
  #513  
EGGPLANT's Avatar
Registered User
iTrader: (12)
Joined: Dec 2008
Posts: 4,818
Likes: 13
From: SoCal - LA
Its super easy.. Its just taking a screw or nut off putting the wire ring on and putting the screw or nut back where ir was
That's it.. Simple simple simple .... Its harder to install an intake than installing this kit
 
Reply
Old Apr 16, 2009 | 01:59 PM
  #514  
EGGPLANT's Avatar
Registered User
iTrader: (12)
Joined: Dec 2008
Posts: 4,818
Likes: 13
From: SoCal - LA
You don't Need to jack stand anything... Just Jack up the car from the passenger side go under and do ur thing and buala done deal
 
Reply
Old Apr 16, 2009 | 02:03 PM
  #515  
SxExCx's Avatar
Thread Starter
|
Former G35driver Vendor
iTrader: (307)
Joined: May 2005
Posts: 9,562
Likes: 458
From: SoCal
Originally Posted by 04ScoupeAT
thats not too bad...as i spent about 2 hours under there jarring and trying to loosen the bolts of old exhaust...to no avail.....where under car is it going? safe to just jack stand the front or use all 4 ?.....and we can expect delivery around a week and a half upon shipment right?
you only need to lift the front/pass side to get to the mounting point.
 
Reply
Old Apr 16, 2009 | 02:03 PM
  #516  
04ScoupeAT's Avatar
Registered User
iTrader: (1)
Joined: Jan 2009
Posts: 214
Likes: 0
From: MD
Originally Posted by bluevelvet
Its super easy.. Its just taking a screw or nut off putting the wire ring on and putting the screw or nut back where ir was
That's it.. Simple simple simple .... Its harder to install an intake than installing this kit
haha ok...i was just lookin at engine bay...are all the old wires in those like vacuum hose things ?!? do i have to cut anything open to uninstall old ones.?

sorry for all the ?'s just like to know all i can b4 i get down and dirty with the install
 
Reply
Old Apr 16, 2009 | 02:05 PM
  #517  
SxExCx's Avatar
Thread Starter
|
Former G35driver Vendor
iTrader: (307)
Joined: May 2005
Posts: 9,562
Likes: 458
From: SoCal
Originally Posted by DKatman
OK. I was hoping to make it later (or that Saturday) so I could hit up this class I go to. BUT...I understand that this is what needs to happen. I can take off from my house at about 9:30am then and be out to you between 10:30 and 11:00 without much problem.

Dave
If you leave at 9:30 on Sunday, you will get here in 30-45 minutes.
 
Reply
Old Apr 16, 2009 | 02:06 PM
  #518  
04ScoupeAT's Avatar
Registered User
iTrader: (1)
Joined: Jan 2009
Posts: 214
Likes: 0
From: MD
Originally Posted by bluevelvet
You don't Need to jack stand anything... Just Jack up the car from the passenger side go under and do ur thing and buala done deal
Originally Posted by SxExCx
you only need to lift the front/pass side to get to the mounting point.
well yea ill just use 1 J-Stand....i dont trust that stock jack for anything...
 
Reply
Old Apr 16, 2009 | 02:26 PM
  #519  
SxExCx's Avatar
Thread Starter
|
Former G35driver Vendor
iTrader: (307)
Joined: May 2005
Posts: 9,562
Likes: 458
From: SoCal
yes, always use a jack stand for your safety
 
Reply
Old Apr 16, 2009 | 02:56 PM
  #520  
DKatman's Avatar
Registered User
iTrader: (8)
Joined: Dec 2008
Posts: 364
Likes: 1
From: Culver City, CA
Originally Posted by SxExCx
If you leave at 9:30 on Sunday, you will get here in 30-45 minutes.
Should I leave a little later? Or still come out at that time?
 
Reply
Old Apr 16, 2009 | 03:45 PM
  #521  
SxExCx's Avatar
Thread Starter
|
Former G35driver Vendor
iTrader: (307)
Joined: May 2005
Posts: 9,562
Likes: 458
From: SoCal
no, the earlier the better
 
Reply
Old Apr 16, 2009 | 05:26 PM
  #522  
DKatman's Avatar
Registered User
iTrader: (8)
Joined: Dec 2008
Posts: 364
Likes: 1
From: Culver City, CA
I will be there. The drawing will be before-hand, so maybe we can get my stuff all installed.
I just know I will win.

I will have my other items available as we discussed. Feel free to PM me about anything else I MUST have. My order should be arriving at home as I write this.

And so I will assume my car will be immortalized in the directions.

Dave
 
Reply
Old Apr 16, 2009 | 05:44 PM
  #523  
blaccG35's Avatar
Registered User
iTrader: (8)
Joined: Oct 2008
Posts: 1,407
Likes: 17
From: 905 c me wen u c me
yes my payment went thru...hey sean add me to the paid list hahaha
 
Reply
Old Apr 16, 2009 | 11:03 PM
  #524  
Evil Wayzz's Avatar
Banned
iTrader: (6)
Joined: Jun 2008
Posts: 6,739
Likes: 53
From: Saint Petersburg, FL
Just sent my payment! add to the payment list also!
 
Reply
Old Apr 17, 2009 | 03:06 PM
  #525  
keff108's Avatar
Registered User
iTrader: (4)
Joined: Nov 2008
Posts: 1,500
Likes: 1
From: PA
Dont mean to be pushy at all Sean take your time with these but any update on when we can expect to recieve these in the mail. Im pretty anxious.
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 10:54 AM.