Registered User
I have a G35 coupe with tan interior and automatic transmission. I'm interested in the 4 line, matte black, perforated leather material with quadruple orange stiching. Could you please pm me with a price. thx.
Quote:
PM sent Originally Posted by 05bLAcKcOUpE
I have a G35 coupe with tan interior and automatic transmission. I'm interested in the 4 line, matte black, perforated leather material with quadruple orange stiching. Could you please pm me with a price. thx.
Is there any way you can make me inserts for the front and back doors that I could install? Do you have access to a 03-06 sedan?
If not I'll see if I can pull that part off my door panels to send out to you.
As I said before, I would like to do my door panels but would much rather use the exact same material.
If not I'll see if I can pull that part off my door panels to send out to you.
As I said before, I would like to do my door panels but would much rather use the exact same material.
Quote:
If not I'll see if I can pull that part off my door panels to send out to you.
As I said before, I would like to do my door panels but would much rather use the exact same material.
I would need a piece to "wrap" or a template to follow, I took apart my doors on my coupe but the side door panels would require me to basically pry apart the plastic parts and to put it back to stock and I would have to glue everything back together. Have you looked at your door panels? Can you send me just the part that needs to be covered? I'd be glad to help ya out man but I've never done inserts on the sedan so more info would help Originally Posted by ttrank
Is there any way you can make me inserts for the front and back doors that I could install? Do you have access to a 03-06 sedan?If not I'll see if I can pull that part off my door panels to send out to you.
As I said before, I would like to do my door panels but would much rather use the exact same material.
NFSP G35
? = 2B || !2B
close
Today
- Join DateApr 2009
- LocationTallahassee, FL (or thereabout)
- Posts:22,160
-
iTrader Positive Feedback100
-
iTrader Feedback Score(22)
-
Likes:201
-
Liked:852 Times in 640 Posts
^I could make you a template off mine. I've had mine off and I saw what you were talking about, it would be a bit difficult to take it apart and wrap it. I think a better solution would be a really good adhesive, tuck it in the seams and razor knife to trim any excess. But I really don't know, you're the upholstery expert :biggthumppup:
Quote:
Best way to do it is to really take it all apart and try and wrap it, only reason for this is because if you just glue it on and trim it with an exacto knife or something similiar it can look good temporarily but it eventually will come off due to heat and the fact that its just tucked into the seams it doesn't hold it very tight but it all depends on the type of material you're using also. Originally Posted by nfsp1
^I could make you a template off mine. I've had mine off and I saw what you were talking about, it would be a bit difficult to take it apart and wrap it. I think a better solution would be a really good adhesive, tuck it in the seams and razor knife to trim any excess. But I really don't know, you're the upholstery expert :biggthumppup:
I can certainly try something but I need some panels to work with....
All orders have been sent, I still can't find my damn usb memory card adapter unfortunately so I might just have to buy one so I can upload some pictures... sorry for the delay for the pix guys!
