GROUP BUY:NiftyShifty G35 Shiftboots *PERFECT FIT*
Im interested in getting one for my 04 AT, black leather with gray stitching but do you have a tutorial with pics so i can install it? and how much would that cost me? shiping 94080 thx
Joined: Sep 2005
Posts: 6,991
Likes: 50
From: Minnesota
soooooooooooooo easy a caveman can do it... guess im dumber than a caveman cuz i cant get the stupid P R N D plate to come off, ended up scratching the thing cuz my flathead screwdriver cut through my towel
Last edited by Aquarius; Feb 12, 2010 at 01:57 PM.
Just put the car in N or D (parking brake!) pull up on the back end of the console(by the cup holders), pull it back from t the ashtray end of the console, CAREFULLY disconnect all yer console switch connectors, then lift and separate!
The shift plate has 3 screws on the underside that secure it to the console.. pull the plate, slip it into the boot, line up the three holes with the bottom of the boot, screw it back on the console and reverse the first three steps.. and yer done! (yes.. that simple!)
BTW.. be VERY careful with these connectors... secret clips that keep them together.. (don't try to muscle them off!)
Just put the car in N or D (parking brake!) pull up on the back end of the console(by the cup holders), pull it back from t the ashtray end of the console, CAREFULLY disconnect all yer console switch connectors, then lift and separate!
The shift plate has 3 screws on the underside that secure it to the console.. pull the plate, slip it into the boot, line up the three holes with the bottom of the boot, screw it back on the console and reverse the first three steps.. and yer done! (yes.. that simple!)
BTW.. be VERY careful with these connectors... secret clips that keep them together.. (don't try to muscle them off!)
The shift plate has 3 screws on the underside that secure it to the console.. pull the plate, slip it into the boot, line up the three holes with the bottom of the boot, screw it back on the console and reverse the first three steps.. and yer done! (yes.. that simple!)
BTW.. be VERY careful with these connectors... secret clips that keep them together.. (don't try to muscle them off!)
Joined: Sep 2005
Posts: 6,991
Likes: 50
From: Minnesota
nope... the console pops out by hand... you might need a tiny flathead screwdriver to get the connectors off.. and of course a phillips to get the shifter plate off.. but nothing else needs to come off...
