bent my rim
#1
Join Date: Jul 2008
Location: HaWaII CuZ
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
#4
Join Date: Jul 2008
Location: HaWaII CuZ
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
#5
#6
Join Date: Jul 2008
Location: HaWaII CuZ
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
#7
I nailed some monster pot hole at the beginning of the year and it actually bent the rim in two different locations on the inside. They were about 12" apart or so and was big enough to cause a slow leak. I had to fill the tire up every other day. They charged me $300, not cheap but a hella lot better then buying a new rim at $1000. needless to say, I'm scanning for those fricken holes now.
Trending Topics
#9
#10
I live in California and bent my rim driving up to San Francisco from L.A. on the 5 freeway going to show at HIN San Mateo.
It got a slow leak and bent the rim on the inside edge.
I emailed and sent Caltrans (California Dept. of Transportation) a pix of my rim, the rough location of the pothole, and a copy of my $175 repair bill.
The state of California wrote me a check for the full amount of $175 because our tax dollars goes to maintaining the freeways.
Since I didn't have to buy another rim, I saved $1900.
Give that a try.
It got a slow leak and bent the rim on the inside edge.
I emailed and sent Caltrans (California Dept. of Transportation) a pix of my rim, the rough location of the pothole, and a copy of my $175 repair bill.
The state of California wrote me a check for the full amount of $175 because our tax dollars goes to maintaining the freeways.
Since I didn't have to buy another rim, I saved $1900.
Give that a try.
Last edited by speedraver; 11-12-2008 at 05:58 PM.
#12
Thread
Thread Starter
Forum
Replies
Last Post