FS: Greddy TT kit with FMIC and extras *pics inside* - LOCAL ONLY
#1
Join Date: Feb 2008
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
FS: Greddy TT kit with FMIC and extras *pics inside* - LOCAL ONLY
ok heres what i have,
Greddy TT kit -- pipes are powder coated black by hitech powdercoating here in hawaii, its 8 layers thick and going to protect those pipes from just about anything it was just done and most of the pipes still have the wrapping on them but i have 2 out of the wrapping to show you.
FMIC -- Has a few dings but nothing serious, has a few bent air fins
Greddy Oil Pan - all hoses included
HKS BOV
CJM stage 0 Fuel return with Walbro fuel pump - BNIB but i took it out to take pics for you guys, comes with fuel gauges
600cc Detchwerks injectors - they are direct replacements of your stock fuel injectors
Turbo XS UTEC
Every nut, bolt and fitting included, you get what you see and i took alot of pics, IT IS EVERYTHING YOU NEED TO RUN TURBOS IN YOUR G35 OR 350Z FOR NON-REVUP except for a new clutch to hold the power. i'm not splitting the kit, it took me to long to get all the parts together in 1 spot which is rare to see everything you need in 1 post... normally you find it in bits and pieces and you have to hunt it all down.... one stop shopping, can't beat that.
price is 5500.
Greddy TT kit -- pipes are powder coated black by hitech powdercoating here in hawaii, its 8 layers thick and going to protect those pipes from just about anything it was just done and most of the pipes still have the wrapping on them but i have 2 out of the wrapping to show you.
FMIC -- Has a few dings but nothing serious, has a few bent air fins
Greddy Oil Pan - all hoses included
HKS BOV
CJM stage 0 Fuel return with Walbro fuel pump - BNIB but i took it out to take pics for you guys, comes with fuel gauges
600cc Detchwerks injectors - they are direct replacements of your stock fuel injectors
Turbo XS UTEC
Every nut, bolt and fitting included, you get what you see and i took alot of pics, IT IS EVERYTHING YOU NEED TO RUN TURBOS IN YOUR G35 OR 350Z FOR NON-REVUP except for a new clutch to hold the power. i'm not splitting the kit, it took me to long to get all the parts together in 1 spot which is rare to see everything you need in 1 post... normally you find it in bits and pieces and you have to hunt it all down.... one stop shopping, can't beat that.
price is 5500.
Last edited by THE-G35; 05-01-2010 at 06:04 PM.
#3
Join Date: Feb 2008
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
utec has a tune on it, never ran it in my car, was going to do the install which is why the pipes are powdercoated to match my car but i wanted to do the internalls at the same time but the price in labor to redo the rods and pistons was 3500 so i backed down and decided to sell the kit and maybe go with perhaps an LS swap. my car is my daily driver and it was recommended not to do a TT because of the strain it'd put on the motor and i can't have my car go out of comission if anything were to go wrong. so playing it safe, that and my wife just lost her job working at the honolulu advitiser so for the time being it makes sense to sell it off and wait for better days.
Thread
Thread Starter
Forum
Replies
Last Post
yosip1115
Forced Induction
8
01-28-2016 02:51 PM